@@ -1,74 +1,131 @@
nipa: dbg: try to capture info about xdp qstat failures
nipa: config: disable kmemleak auto scan
nipa: config: x86: disable GPUs and sound
nipa: drv: net: add timeout
nipa: forwarding: set timeout to 3 hours
nipa: config: disable CPU_MITIGATIONS
nipa: tc_action dbg
nipa: selftests: net: enable profiling
nipa: dbg: tests: bonding: print info on failure
nipa: timestamp - try waking
nipa: profile (time) test output
nipa: config: x86: use periodic HZ tick
nipa: disable 6.17's merge window kunit tests
nipa: disable random kunit tests
nipa: fbnic: link up on QEMU
[+] net: bonding: use atomic instead of rtnl_mutex, to make sure peer notify updated
[+] net: phy: qt2025: Wait until PHY becomes ready
[+] selftests/bpf: Add mptcp test with sockmap
[+] net,mptcp: fix proto fallback detection with BPF
[+] mptcp: disallow MPTCP subflows from sockmap
[+] net: ethernet: broadcom: bgmac: add SPDX license identifier
[+] net: bridge: fix MST static key usage
[+] net: bridge: fix use-after-free due to MST port state bypass
[+] net: ethernet: fix uninitialized pointers with free attr
[+] tcp: add net.ipv4.tcp_comp_sack_rtt_percent
[+] lan966x: Fix sleeping in atomic context
[+] bonding: fix NULL pointer dereference in actor_port_prio setting
[+] net: phy: microchip_t1s:: add cable diagnostic support for LAN867x Rev.D0
[+] net: phy: phy-c45: add OATC14 10BASE-T1S PHY cable diagnostic support
[+] net: enetc: add port MDIO support for ENETC v4
[+] net: enetc: set external MDIO PHY address for i.MX94 ENETC
[+] net: enetc: set external MDIO PHY address for i.MX95 ENETC
[+] net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
[+] net: dsa: microchip: Fix reserved multicast address table programming
[+] net: txgbe: remove wx_ptp_init() in device reset flow
[+] net/sched: Fix possible infinite loop in qdisc_tree_reduce_backlog()
[+] eea: introduce ethtool support
[+] eea: create/destroy rx,tx queues for netdevice open and stop
[+] eea: probe the netdevice and create adminq
[+] eea: introduce ring and descriptor structures
[+] eea: introduce PCI framework
[+] tools: ynltool: add traffic distribution balance
[+] tools: ynltool: add qstats support
[+] tools: ynltool: add page-pool stats
[+] tools: ynltool: create skeleton for the C command
[+] netlink: specs: netdev add missing stats to qstat-get
[+] ptp: Return -EINVAL on ptp_clock_register if required ops are NULL
[+] net: ravb: Use common defines for time stamping control
[+] net: ravb: Break out Rx hardware timestamping
[+] net: rcar_gen4_ptp: Remove unused defines
[+] net: rtsn: Use common defines for time stamping control
[+] net: rswitch: Use common defines for time stamping control
[+] net: rcar_gen4_ptp: Move control fields to users
[+] net: rswitch: Move definition of S4 gPTP offset
[+] selftest: netcons: add test for netconsole over bonded interfaces
[+] selftest: netcons: create a torture test
[+] selftest: netcons: refactor target creation
[+] net: netpoll: fix incorrect refcount handling causing incorrect cleanup
[+] net: gro_cells: Reduce lock scope in gro_cell_poll
[+] iavf: clarify VLAN add/delete log messages and lower log level
[+] net/ipv6: drop ip6_route_get_saddr
[+] net/ipv6: use ipv6_fl_get_saddr in output
[+] net/ipv6: create ipv6_fl_get_saddr
[+] net/ipv6: flatten ip6_route_get_saddr
[+] net/mlx5e: Fix return value in case of module EEPROM read error
[+] net: ti: icssg-prueth: Fix fdb hash size configuration
[+] dt-bindings: ethernet: eswin: fix yaml schema issues
[+] selftests: net: local_termination: Wait for interfaces to come up
[+] net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
[+] net/mlx5e: SHAMPO, Fix skb size check for 64K pages
[+] net/mlx5e: SHAMPO, Fix header mapping for 64K pages
[+] net: libwx: fix device bus LAN ID
idpf: add support for IDPF PCI programming interface
net: dsa: add driver for MaxLinear GSW1xx switch family
net: dsa: add tagging driver for MaxLinear GSW1xx switch family
dt-bindings: net: dsa: lantiq,gswip: add support for MaxLinear GSW1xx switches
net: dsa: lantiq_gswip: allow adjusting MII delays
dt-bindings: net: dsa: lantiq,gswip: add support for MII delay properties
net: dsa: lantiq_gswip: add vendor property to setup MII refclk output
dt-bindings: net: dsa: lantiq,gswip: add MaxLinear RMII refclk output property
net: dsa: lantiq_gswip: define and use GSWIP_TABLE_MAC_BRIDGE_VAL1_VALID
net: dsa: lantiq_gswip: set link parameters also for CPU port
net: dsa: lantiq_gswip: support Energy Efficient Ethernet
net: dsa: lantiq_gswip: support enable/disable learning
net: dsa: lantiq_gswip: split into common and MMIO parts
s390/ctcm: Use info level for handshake UC_RCRESET
ppp: enable TX scatter-gather
netkit: Add xsk support for af_xdp applications
netkit: Add io_uring zero-copy support for TCP
netkit: Add netkit notifier to check for unregistering devices
netkit: Implement rtnl_link_ops->alloc and ndo_queue_create
netkit: Document fast vs slowpath members via macros
netkit: Add single device mode for netkit
xsk: Proxy pool management for mapped queues
xsk: Extend xsk_rcv_check validation
xsk: Move NETDEV_XDP_ACT_ZC into generic header
net: Proxy net_mp_{open,close}_rxq for mapped queues
net, ethtool: Disallow peered real rxqs to be resized
net: Add peer info to queue-get response
net: Implement netdev_nl_bind_queue_doit
net: Add bind-queue operation
net: stmmac: socfpga: Add hardware supported cross-timestamp
net: stmmac: socfpga: Enable TSO for Agilex5 platform
net: stmmac: socfpga: Enable TBS support for Agilex5
net: stmmac: socfpga: Agilex5 EMAC platform configuration
net: dsa: microchip: Fix a link check in ksz9477_pcs_read()
net: mdio: improve reset handling in mdio_device.c
net: mdio: common handling of phy device reset properties
net: mdio: move device reset functions to mdio_device.c
amd-xgbe: add ethtool jumbo frame selftest
amd-xgbe: add ethtool split header selftest
amd-xgbe: add ethtool phy loopback selftest
amd-xgbe: introduce support ethtool selftest
net: selftests: export packet creation helpers for driver use
xsk: add indirect call for xsk_destruct_skb
tcp: accecn: enable AccECN
tcp: accecn: detect loss ACK w/ AccECN option and add TCP_ACCECN_OPTION_PERSIST
tcp: accecn: fallback outgoing half link to non-AccECN
tcp: accecn: unset ECT if receive or send ACE=0 in AccECN negotiaion
tcp: accecn: retransmit SYN/ACK without AccECN option or non-AccECN SYN/ACK
tcp: move increment of num_retrans
tcp: accecn: retransmit downgraded SYN in AccECN negotiation
tcp: accecn: handle unexpected AccECN negotiation feedback
tcp: disable RFC3168 fallback identifier for CC modules
tcp: L4S ECT(1) identifier and NEEDS_ACCECN for CC modules
selftests/net: gro: add self-test for TCP CWR flag
net: update commnets for SKB_GSO_TCP_ECN and SKB_GSO_TCP_ACCECN
gro: flushing when CWR is set negatively affects AccECN
tcp: try to avoid safer when ACKs are thinned
net/rds: Give each connection its own workqueue
net/rds: Add per cp work queue