@@ -1,112 +1,53 @@
nipa: config: disable kmemleak auto scan
nipa: config: x86: disable GPUs and sound
nipa: drv: net: add timeout
nipa: forwarding: set timeout to 3 hours
nipa: config: disable CPU_MITIGATIONS
nipa: tc_action dbg
nipa: selftests: net: enable profiling
nipa: dbg net/sctp_vrf.sh
nipa: dbg: tests: bonding: print info on failure
nipa: timestamp - try waking
nipa: profile (time) test output
nipa: config: x86: use periodic HZ tick
nipa: disable 6.17's merge window kunit tests
nipa: disable random kunit tests
nipa: fbnic: link up on QEMU
net: dsa: lantiq_gswip: treat VID 0 like the PVID
net: dsa: lantiq_gswip: drop untagged on VLAN-aware bridge ports with no PVID
net: dsa: lantiq_gswip: put a more descriptive error print in gswip_vlan_remove()
net: dsa: lantiq_gswip: remove vlan_aware and pvid arguments from gswip_vlan_remove()
net: dsa: lantiq_gswip: disallow changes to privately set up VID 0
net: dsa: lantiq_gswip: permit dynamic changes to VLAN filtering state
net: dsa: lantiq_gswip: remove legacy configure_vlan_while_not_filtering option
net: dsa: lantiq_gswip: merge gswip_vlan_add_unaware() and gswip_vlan_add_aware()
net: dsa: lantiq_gswip: remove duplicate assignment to vlan_mapping.val[0]
net: dsa: lantiq_gswip: define VLAN ID 0 constant
net: dsa: lantiq_gswip: support bridge FDB entries on the CPU port
rtnetlink: Allow deleting FDB entries in user namespace
dt-bindings: net: qcom: ethernet: Add interconnect properties
net: stmmac: rename stmmac_phy_setup() to include phylink
net: stmmac: rearrange tc_init()
net: stmmac: avoid PHY speed change when configuring MTU
net: stmmac: place .mac_finish() method more appropriately
net: stmmac: dwc-qos-eth: move MDIO bus locking into stmmac_mdio
net: ravb: Enforce descriptor type ordering to prevent early DMA start
net: ravb: Allocate correct number of queues based on SoC support
net: ravb: Make DBAT entry count configurable per-SoC
[-] net: stmmac: convert to phylink PCS support
[-] net: stmmac: provide PCS initialisation hook
[-] net: stmmac: only call stmmac_pcs_ctrl_ane() for integrated SGMII PCS
[-] net: stmmac: do not require snps,ps-speed for SGMII
[-] net: stmmac: hw->ps becomes hw->reverse_sgmii_enable
[-] net: stmmac: simplify stmmac_check_pcs_mode()
[-] net: stmmac: move reverse-"pcs" mode setup to stmmac_check_pcs_mode()
[-] net: stmmac: remove RGMII "pcs" mode
[-] net: stmmac: remove hw->ps xxx_core_init() hardware setup
[-] net: stmmac: remove unused PCS loopback support
[-] net: stmmac: remove PCS "mode" pause handling
[-] net: stmmac: remove SGMII/RGMII/SMII interrupt handling
[-] net: stmmac: remove xstats.pcs_* members
[-] net: stmmac: remove broken PCS code
[-] net: bonding: update the slave array for broadcast mode
net: stmmac: add Eswin EIC7700 glue driver
dt-bindings: ethernet: eswin: Document for EIC7700 SoC
net: ethtool: tsconfig: Re-configure hwtstamp upon provider change
net: stmmac: Allow supporting coarse adjustment mode
net: stmmac: Move subsecond increment configuration in dedicated helper
net/hsr: add interlink to fill_info output
net: rmnet: Fix checksum offload header v5 and aggregation packet formatting
Octeontx2-af: Fix pci_alloc_irq_vectors() return value check
netdevsim: add ipsec hw_features
net: dsa: tag_brcm: legacy: fix untagged rx on unbridged ports for bcm63xx
net/mlx5e: psp, avoid 'accel' NULL pointer dereference
net: gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
[c] udp: do not use skb_release_head_state() before skb_attempt_defer_free()
[-] net: dwmac-rk: No need to check the return value of phy_power_on()
net: amd-xgbe: use EOPNOTSUPP instead of ENOTSUPP in xgbe_phy_mii_read_c45
net/mlx5e: Return 1 instead of 0 in invalid case in mlx5e_mpwrq_umr_entry_size()
net: usb: rtl8150: Fix frame padding
netpoll: Fix deadlock in memory allocation under spinlock
net: stmmac: dwmac-rk: Fix disabling set_clock_selection
[-] net: dsa: yt921x: Add support for Motorcomm YT921x
[-] net: dsa: tag_yt921x: add support for Motorcomm YT921x tags
[-] dt-bindings: net: dsa: yt921x: Add Motorcomm YT921x switch support
[-] bonding: Selftest and documentation for the arp_ip_target parameter.
[-] bonding: Update for extended arp_ip_target format.
[-] bonding: Update to bond_arp_send_all() to use supplied vlan tags
[-] bonding: Processing extended arp_ip_target from user space.
[-] bonding: arp_ip_target helpers.
[-] bonding: Adding extra_len field to struct bond_opt_value.
[-] bonding: Adding struct bond_arp_target
[c] dt-bindings: net: Convert amd,xgbe-seattle-v1a to DT schema
[c] net: fbnic: Allow builds for all 64 bit architectures
[c] net: fbnic: Fix page chunking logic when PAGE_SIZE > 4K
[-] tcp: accecn: enable AccECN
[-] tcp: accecn: detect loss ACK w/ AccECN option and add TCP_ACCECN_OPTION_PERSIST
[-] tcp: accecn: verify ACE counter in 1st ACK after AccECN negotiation
[-] tcp: accecn: fallback outgoing half link to non-AccECN
[-] tcp: accecn: unset ECT if receive or send ACE=0 in AccECN negotiaion
[-] tcp: accecn: retransmit SYN/ACK without AccECN option or non-AccECN SYN/ACK
[-] tcp: move increment of num_retrans
[-] tcp: accecn: retransmit downgraded SYN in AccECN negotiation
[-] tcp: accecn: handle unexpected AccECN negotiation feedback
[-] tcp: disable RFC3168 fallback identifier for CC modules
[-] tcp: L4S ECT(1) identifier and NEEDS_ACCECN for CC modules
[-] gro: flushing when CWR is set negatively affects AccECN
[-] tcp: try to avoid safer when ACKs are thinned
[-] Documentation: networking: Document the phy_port infrastructure
[-] net: phy: dp83822: Add SFP support through the phy_port interface
[-] net: phy: Only rely on phy_port for PHY-driven SFP
[-] net: phy: qca807x: Support SFP through phy_port interface
[-] net: phy: at803x: Support SFP through phy_port interface
[-] net: phy: marvell10g: Support SFP through phy_port
[-] net: phy: marvell: Support SFP through phy_port interface
[-] net: phy: marvell-88x2222: Support SFP through phy_port interface
[-] net: phy: Introduce generic SFP handling for PHY drivers
[-] net: phy: Create a phy_port for PHY-driven SFPs
[-] dt-bindings: net: dp83822: Deprecate ti,fiber-mode
[-] net: phy: dp83822: Add support for phy_port representation
[-] net: phy: Introduce PHY ports representation
[-] net: ethtool: Introduce ETHTOOL_LINK_MEDIUM_* values
[-] net: ethtool: common: Indicate that BaseT works on up to 4 lanes
[-] dt-bindings: net: Introduce the ethernet-connector description