@@ -1,74 +1,325 @@
fbnic: link up on QEMU
nipa: config: disable kmemleak auto scan
selftests: net: fix server bind failure in sctp_vrf.sh
nipa: config: x86: disable GPUs and sound
nipa: drv: net: add timeout
nipa: forwarding: set timeout to 3 hours
[-] ksft: add BTF
nipa: config: disable CPU_MITIGATIONS
nipa: tc_action dbg
nipa: selftests: net: enable profiling
nipa: dbg: tests: bonding: print info on failure
nipa: timestamp - try waking
nipa: profile (time) test output
nipa: config: x86: use periodic HZ tick
nipa: disable 6.17's merge window kunit tests
nipa: disable random kunit tests
[+] xfrm: xfrm_user: use strscpy() for alg_name
[+] net: ipv6: fix field-spanning memcpy warning in AH output
[+] net: libwx: restrict change user-set RSS configuration
[+] net: wangxun: add RSS reta and rxfh fields support
[+] net: libwx: move rss_field to struct wx
[+] net: libwx: support separate RSS configuration for every pool
[+] net: enetc: initialize SW PIR and CIR based HW PIR and CIR values
[+] Merge tag 'wireless-next-2025-09-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
[+] net: remove one stac/clac pair from move_addr_to_user()
[+] scm: use masked_user_access_begin() in put_cmsg()
[+] selftests: drv-net: psp: add tests for destroying devices
[+] selftests: drv-net: psp: add test for auto-adjusting TCP MSS
[+] selftests: drv-net: psp: add connection breaking tests
[+] selftests: drv-net: psp: add association tests
[+] selftests: drv-net: psp: add basic data transfer and key rotation tests
[+] selftests: drv-net: add PSP responder
[+] selftests: drv-net: base device access API test
[+] netdevsim: a basic test PSP implementation
[+] atm: Fix the cleanup on alloc_mpc failure in atm_mpoa_mpoad_attach
[+] net: stmmac: Add support for Allwinner A523 GMAC200
[+] dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
[+] netfilter: nf_flow_table_core: teardown direct xmit when destination changed
[+] netfilter: flow: Add bridge_vid member
[+] idpf: fix mismatched free function for dma_alloc_coherent
[+] selftests: forwarding: README: Mention defer, adf_
[+] selftests: forwarding: lib: Add an autodefer variant of forwarding_enable()
[+] selftests: forwarding: lib: Add an autodefer variant of simple_if_init()
[+] selftests: forwarding: lib: Add an autodefer variant of vrf_prepare()
[+] selftests: net: vlan_bridge_binding: Rename dfr_set_binding_*() to adf_*
[+] selftests: net: lib: Rename bridge_vlan_add() to adf_*
[+] selftests: net: lib: Rename ip_route_add() to adf_*
[+] selftests: net: lib: Rename ip_addr_add() to adf_*
[+] selftests: net: lib: Rename ip_link_set_down() to adf_*
[+] selftests: net: lib: Rename ip_link_set_up() to adf_*
[+] selftests: net: lib: Rename ip_link_set_addr() to adf_*
[+] selftests: net: lib: Rename ip_link_set_master() to adf_*
[+] selftests: net: lib: Rename ip_link_add() to adf_*
[+] selftests: drv-net: Reload pkt pointer after calling filter_udphdr
ptp: Add a upper bound on max_vclocks
net: stmmac: tc: Add HLBS drop count to taprio stats
net: stmmac: est: Drop frames causing HLBS error
net: nfc: nci: Add parameter validation for packet data
selftest: net: Fix error message if empty variable
dpll: zl3073x: Fix double free in zl3073x_devlink_flash_update()
dt-bindings: net: sparx5: correct LAN969x register space windows
octeon_ep_vf: Add support to retrieve hardware channel information
octeon_ep: Add support to retrieve hardware channel information
[+] can: netlink: add userland error messages
[+] can: dev: add can_get_ctrlmode_str()
[+] can: calc_bittiming: make can_calc_tdco() FD agnostic
[+] can: netlink: make can_tdc_fill_info() FD agnostic
[+] can: netlink: add can_bitrate_const_fill_info()
[+] can: netlink: add can_bittiming_const_fill_info()
[+] can: netlink: add can_bittiming_fill_info()
[+] can: netlink: add can_data_bittiming_get_size()
[+] can: netlink: make can_tdc_get_size() FD agnostic
[+] can: netlink: add can_ctrlmode_changelink()
[+] can: netlink: add can_dtb_changelink()
[+] can: netlink: make can_tdc_changelink() FD agnostic
[+] can: netlink: remove useless check in can_tdc_changelink()
[+] can: netlink: refactor CAN_CTRLMODE_TDC_{AUTO,MANUAL} flag reset logic
[+] can: netlink: add can_validate_databittiming()
[+] can: netlink: add can_validate_tdc()
[+] can: netlink: refactor can_validate_bittiming()
[+] can: netlink: document which symbols are FD specific
[+] can: dev: make can_get_relative_tdco() FD agnostic and move it to bittiming.h
[+] can: dev: move struct data_bittiming_params to linux/can/bittiming.h
[+] can: enable CAN XL for virtual CAN devices by default
[+] can: populate the minimum and maximum MTU values
[+] can: dev: turn can_set_static_ctrlmode() into a non-inline function
[+] can: annotate mtu accesses with READ_ONCE()
[+] can: raw: reorder struct raw_sock's members to optimise packing
[+] can: raw: use bitfields to store flags in struct raw_sock
[+] can: raw: reorder struct uniqframe's members to optimise packing
[+] can: esd_usb: Avoid errors triggered from USB disconnect
[+] can: esd_usb: Rework display of error messages
[+] can: rcar_can: Convert to %pe
[+] can: rcar_can: Do not print alloc_candev() failures
[+] can: rcar_can: Mailbox bitfield conversion
[+] can: rcar_can: BCR bitfield conversion
[+] can: rcar_can: TFCR bitfield conversion
[+] can: rcar_can: CTLR bitfield conversion
[+] can: rcar_can: Convert to GENMASK()
[+] can: rcar_can: Convert to BIT()
[+] can: rcar_can: Convert to Runtime PM
[+] can: rcar_can: Add helper variable dev to rcar_can_probe()
[+] can: rcar_can: Consistently use ndev for net_device pointers
[+] can: rcar_canfd: Simplify data bit rate config
[+] can: rcar_canfd: Simplify nominal bit rate config
[+] can: rcar_canfd: Update RCANFD_CFG_* macros
[+] can: rcar_canfd: Update bit rate constants for RZ/G3E and R-Car Gen4
[+] can: peak: Modification of references to email accounts being deleted
[+] can: dev: sort includes by alphabetical order
[+] MAINTAINERS: update Vincent Mailhol's email address
[+] can: m_can: use us_to_ktime() where appropriate
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
net/mlx5: Expose uar access and odp page fault counters
mptcp: pm: in-kernel: add laminar endpoints
mptcp: pm: in-kernel: compare IDs instead of addresses
mptcp: pm: in-kernel: reduce pernet struct size
mptcp: pm: in-kernel: remove stale_loss_cnt
mptcp: pm: in-kernel: rename 'addrs' to 'endpoints'
mptcp: pm: in-kernel: rename 'local_addr_list' to 'endp_list'
mptcp: pm: in-kernel: rename 'local_addr_max' to 'endp_subflow_max'
mptcp: pm: in-kernel: rename 'add_addr_accept_max' to 'limit_add_addr_accepted'
mptcp: pm: in-kernel: rename 'add_addr_signal_max' to 'endp_signal_max'
mptcp: pm: in-kernel: rename 'subflows_max' to 'limit_extra_subflows'
mptcp: pm: rename 'subflows' to 'extra_subflows'
mptcp: pm: in-kernel: refactor fill_remote_addresses_vec
mptcp: pm: in-kernel: refactor fill_local_addresses_vec
selftests: mptcp: join: validate C-flag + def limit
mptcp: pm: in-kernel: usable client side with C-flag
psp: Expand PSP acronym in INET_PSP help description
net: phy: micrel: Fix lan8814_config_init
vhost: vringh: Fix copy_to_iter return value check
6pack: drop redundant locking and refcounting
virtio-net: correct hdr_len handling for VIRTIO_NET_F_GUEST_HDRLEN
virtio-net: fix incorrect flags recording in big mode
[-] inet: Avoid ehash lookup race in inet_twsk_hashdance_schedule()
[-] inet: Avoid ehash lookup race in inet_ehash_insert()
[-] rculist: Add hlist_nulls_replace_rcu() and hlist_nulls_replace_init_rcu()
[-] net: enetc: fix the deadlock of enetc_mdio_lock
selftests: drv-net: Enable BTF
net: airoha: npu: Add a NPU callback to initialize flow stats
ixgbe: avoid redundant call to ixgbe_non_sfp_link_config()
eth: fbnic: Add support to read lane count
net: stmmac: Convert open-coded register polling to helper macro
dibs: Check correct variable in dibs_init()
[+] net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast
net: renesas: rswitch: Remove unneeded semicolons
selftests: net-drv: stats: sanity check FEC histogram
net/mlx5e: Report RS-FEC histogram statistics via ethtool
net/mlx5e: Add logic to read RS-FEC histogram bin ranges from PPHCR
net/mlx5e: Don't query FEC statistics when FEC is disabled
ethtool: add FEC bins histogram report
Documentation: net: add flow control guide and document ethtool API
[-] tipc: adjust tipc_nodeid2string() to return string length
net: enetc: Fix probing error message typo for the ENETCv4 PF driver
Wangxun: vf: Implement some ethtool apis for get_xxx
net: qed: Remove redundant NULL checks after list_first_entry()
xdp: use multi-buff only if receive queue supports page pool
ptr_ring: drop duplicated tail zeroing code
net: dns_resolver: Fix request-key cross-reference
net: dns_resolver: Move dns_query() explanation out of code block
net: dns_resolver: Use reST bullet list for features list
[+] wifi: libertas: add WQ_UNBOUND to alloc_workqueue users
[+] Revert "wifi: libertas: WQ_PERCPU added to alloc_workqueue users"
[+] wifi: libertas: WQ_PERCPU added to alloc_workqueue users
[+] wifi: cfg80211: fix width unit in cfg80211_radio_chandef_valid()
[+] Merge tag 'ath-next-20250922' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
[+] wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again
[+] wifi: ath12k: enforce CPU endian format for all QMI data
[+] wifi: ath12k: Use 1KB Cache Flush Command for QoS TID Descriptors
[+] wifi: ath12k: Fix flush cache failure during RX queue update
[+] wifi: ath12k: Add Retry Mechanism for REO RX Queue Update Failures
[+] wifi: ath12k: Refactor REO command to use ath12k_dp_rx_tid_rxq
[+] wifi: ath12k: Refactor RX TID buffer cleanup into helper function
[+] wifi: ath12k: Refactor RX TID deletion handling into helper function
[+] wifi: ath12k: Increase DP_REO_CMD_RING_SIZE to 256
[+] Merge tag 'rtw-next-2025-09-22' of https://github.com/pkshih/rtw
[+] wifi: cfg80211: remove IEEE80211_CHAN_{1,2,4,8,16}MHZ flags
[+] wifi: rtw89: avoid circular locking dependency in ser_state_run()
[+] wifi: rtw89: fix leak in rtw89_core_send_nullfunc()
[+] wifi: rtw89: avoid possible TX wait initialization race
[+] wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait()
[+] wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu()
[+] wifi: mac80211: fix Rx packet handling when pubsta information is not available
[+] wifi: cfg80211: remove ieee80211_s1g_channel_width
[+] wifi: mac80211: correctly initialise S1G chandef for STA
[+] wifi: cfg80211: correctly implement and validate S1G chandef
[+] wifi: mac80211: remove tx_handlers_drop debugfs stats
[+] wifi: mac80211: Remove redundant rcu_read_lock/unlock() in spin_lock
[+] wifi: mac80211_hwsim: Add simulation support for NAN device
[+] wifi: mac80211: Extend support for changing NAN configuration
[+] wifi: mac80211: Export an API to check if NAN is started
[+] wifi: mac80211: Get the correct interface for non-netdev skb status
[+] wifi: mac80211: Track NAN interface start/stop
[+] wifi: mac80211: Accept management frames on NAN interface
[+] wifi: mac80211: Support Tx of action frame for NAN
[+] wifi: cfg80211: Store the NAN cluster ID
[+] wifi: cfg80211: Support Tx/Rx of action frame for NAN
[+] wifi: cfg80211: Advertise supported NAN capabilities
[+] wifi: nl80211: Add more NAN capabilities
[+] wifi: cfg80211: Add cluster joined notification APIs
[+] wifi: nl80211: Add NAN Discovery Window (DW) notification
[+] wifi: nl80211: Add more configuration options for NAN commands
[+] Merge tag 'mt76-next-2025-09-15' of https://github.com/nbd168/wireless
[+] wifi: ath12k: Extend beacon miss handling for MLO non-AP STA
[+] wifi: ath12k: Add support to handle reason inactivity STA kickout event for QCN9274/IPQ5332
[+] wifi: ath12k: enhance the WMI_PEER_STA_KICKOUT event with reasons and RSSI reporting
[+] wifi: ath12k: report station mode per-chain signal strength
[+] wifi: ath10k: Fix connection after GTK rekeying
[+] wifi: ath10k: avoid unnecessary wait for service ready message
[+] wifi: ath11k: fix NULL dereference in ath11k_qmi_m3_load()
[+] wifi: ath: Use of_reserved_mem_region_to_resource() for "memory-region"
[+] wifi: ath10k: remove gpio number assignment
[+] wifi: ath11k: Remove redundant semicolon
[+] wifi: ath12k: downgrade log level for CE buffer enqueue failure
[+] wifi: ath12k: fix wrong logging ID used for CE
[+] wifi: ath11k: downgrade log level for CE buffer enqueue failure
[+] wifi: ath12k: Add fallback for invalid channel number in PHY metadata
[+] wifi: ath12k: fix the fetching of combined rssi
[+] wifi: ath12k: fix HAL_PHYRX_COMMON_USER_INFO handling in monitor mode
[+] wifi: ath12k: fix signal in radiotap for WCN7850
[+] wifi: ath12k: fix overflow warning on num_pwr_levels
[+] wifi: ath12k: initialize eirp_power before use
[+] wifi: ath12k: Add support to set per-radio RTS threshold
[+] wifi: rtw89: wow: enable TKIP related feature
[+] wifi: rtw89: 8922a: add TAS feature support
[+] wifi: rtw89: open C2H event waiting window first before sending H2C command
[+] wifi: rtw89: renew a completion for each H2C command waiting C2H event
[+] wifi: rtw89: 8852b: enable beacon tracking support
[+] wifi: rtw89: debug: support SER L0 simulation
[+] wifi: rtw89: phy: initialize AFE by firmware element table
[+] wifi: rtw89: obtain RX path from ppdu status IE00
[+] wifi: rtw89: disable RTW89_PHYSTS_IE09_FTR_0 for ppdu status
[+] wifi: rtw89: use ieee80211_tx_info::driver_data to store driver TX info
[+] wifi: rtw89: chan: allow callers to check if a link has no managed chanctx
[+] wifi: mt76: abort scan/roc on hw restart
[+] wifi: mt76: improve phy reset on hw restart
[+] wifi: mt76: mt7996: fill User Priority in skb->priority for rx packets
[+] wifi: mt76: mt7996: set VTA in txwi
[+] wifi: mt76: mt7996: remove the mem_total field of STA_REC_BF command
[+] wifi: mt76: mt7996: disable promiscuous mode by default
[+] wifi: mt76: use altx queue for offchannel tx on connac+
[+] wifi: mt76: mt7996: fix updating beacon protection with beacons enabled
[+] wifi: mt76: mt7996: fix key add/remove imbalance
[+] wifi: mt76: mt7996: delete vif keys when requested
[+] wifi: mt76: mt7996: fix memory leak on mt7996_mcu_sta_key_tlv error
[+] wifi: mt76: mt7996: fix setting beacon protection keys
[+] wifi: mt76: mt7996: decrease timeout for commonly issued MCU commands
[+] wifi: mt76: mt7996: improve hardware restart reliability
[+] wifi: mt76: mt7996: remove redundant per-phy mac80211 calls during restart
[+] wifi: mt76: mt7921u: Add VID/PID for Netgear A7500
[+] wifi: mt76: mt76_eeprom_override to int
[+] wifi: mt76: mt7996: support writing MAC TXD for AddBA Request
[+] wifi: mt76: mt7925: refine the txpower initialization flow
[+] wifi: mt76: mt7915: fix mt7981 pre-calibration
[+] wifi: mt76: Convert mt76_wed_rro_ind to LE
[+] wifi: mt76: mt7996: Add SW path for HW-RRO v3.1
[+] wifi: mt76: Add mt76_dma_get_rxdmad_c_buf utility routione
[+] wifi: mt76: mt7996: Decouple RRO logic from WED support
[+] wifi: mt76: Add rx_queue_init callback
[+] wifi: mt76: mt7996: Introduce RRO MSDU callbacks
[+] wifi: mt76: mt7996: Convert mt7996_wed_rro_addr to LE
[+] wifi: mt76: mt7996: Enable WED for MT7992 chipset
[+] wifi: mt76: mt7996: Fix RX packets configuration for primary WED device
[+] wifi: mt76: mt7996: Fix tx-queues initialization for second phy on mt7996
[+] wifi: mt76: mt7996: Introduce the capability to reset MT7992 WED device
[+] wifi: mt76: mt7996: Enable HW RRO for MT7992 chipset
[+] wifi: mt76: mt7996: Initial DMA configuration for MT7992 WED support
[+] wifi: mt76: Do not always enable NAPIs for WED RRO queues
[+] wifi: mt76: Differentiate between RRO data and RRO MSDU queues
[+] wifi: mt76: Remove q->ndesc check in mt76_dma_rx_fill()
[+] wifi: mt76: Add reset_idx to reset_q mt76_queue_ops signature.
[+] wifi: mt76: mt7996: Enable MLO support for client interfaces
[+] wifi: mt76: mt7996: Set EML capabilities for AP interface
[+] wifi: mt76: mt7996: Export MLO AP capabilities to mac80211
[+] wifi: mt76: mt7996: Temporarily disable EPCS
[+] wifi: mt76: mt7996: Implement MLD address translation for EAPOL
[+] wifi: mt76: mt7996: Add all active links to poll list in mt7996_mac_tx_free()
[+] wifi: mt76: mt7996: Fix mt7996_reverse_frag0_hdr_trans for MLO
[+] wifi: mt76: mt7996: Use proper link info in mt7996_mcu_add_group
[+] wifi: mt76: mt7921: Add 160MHz beamformee capability for mt7922 device
[+] wifi: mt76: mt7925: add pci restore for hibernate
[+] wifi: mt76: mt7996: Check phy before init msta_link in mt7996_mac_sta_add_links()
[+] wifi: mt76: mt7996: Use proper link_id in link_sta_rc_update callback
[+] wifi: mt76: Remove dead code in mt76_scan_work
[+] wifi: mt76: mt7996: Use deflink for AMPDU rx reordering
[+] wifi: mt76: mt7921: add MBSSID support
[+] wifi: mt76: fix potential memory leak in mt76_wmac_probe()
[+] wifi: mt76: mt7925: add MBSSID support
[+] wifi: mt76: mt7925u: Add VID/PID for Netgear A9000
[+] wifi: mt76: mt7996: Set proper link destination address in mt7996_tx()
[+] wifi: mt76: mt7996: Set def_wcid pointer in mt7996_mac_sta_init_link()
[+] wifi: mt76: mt7996: Fix mt7996_mcu_bss_mld_tlv routine
[+] wifi: mt76: mt7996: Fix mt7996_mcu_sta_ba wcid configuration
[+] wifi: mt76: mt7996: Overwrite unspecified link_id in mt7996_tx()
[+] wifi: rtw89: Add USB ID 2001:3327 for D-Link AX18U rev. A1
[+] wifi: rtw89: Add USB ID 2001:332a for D-Link AX9U rev. A1
[+] wifi: rtl8xxxu: expose efuse via debugfs
[+] wifi: rtw89: 8852bt: Remove redundant off_reverse variables
[+] wifi: rtw89: use int type to store negative error codes
[+] wifi: rtw89: add getting function of DMA channel v1
[+] wifi: rtw89: abstract getting function of DMA channel
[+] wifi: rtw89: pci: add RPP parser v1
[+] wifi: rtw89: pci: abstract RPP parser
[+] wifi: rtw89: pci: add group BD address design
[+] wifi: rtw89: pci: define TX/RX buffer descriptor pool
[+] wifi: rtw89: pci: add struct rtw89_{tx,rx}_rings to put related fields
[+] wifi: rtw89: pci: use RDU status of R_BE_PCIE_DMA_IMR_0_V1 instead for 8922DE
[+] wifi: rtw89: pci: prepare interrupt related registers and functions for 8922DE
[+] wifi: rtw89: pci: move chip ISR definition out from chip generation
[+] wifi: rtl8xxxu: Remove TL-WN722N V2 (0x2357: 0x010c) from untested devices
[+] wifi: rtw88: Use led->brightness_set_blocking for PCI too
[+] wifi: rtw89: coex: Limit Wi-Fi scan slot cost to avoid A2DP glitch
[+] wifi: rtw89: 8852c: update firmware crash trigger type for newer firmware
[+] wifi: rtw89: 8852a: report average RSSI to avoid unnecessary scanning
[+] wifi: rtw89: 8852a: report per-channel noise level by get_survey ops
[+] wifi: rtw89: 8852bt: Simplify unnecessary if-else conditions in _dpk_onoff()
[+] wifi: rtl8xxxu: Don't claim USB ID 07b8:8188
[+] wifi: rtlwifi: rtl8192cu: Don't claim USB ID 07b8:8188
[+] wifi: rtw89: fix group frames loss when connected to non-transmitted BSSID
[+] wifi: rtw89: fix BSSID comparison for non-transmitted BSSID
[+] wifi: rtw89: 8852c: check LPS H2C command complete by C2H reg instead of done ack
[+] wifi: rtw89: 8851b: rfk: update TX wideband IQK
[+] wifi: rtw89: 8851b: rfk: update IQK TIA setting
[+] wifi: rtw89: wow: remove notify during WoWLAN net-detect
[+] wifi: rtw89: debug: add beacon_info debugfs
[+] wifi: rtw89: introduce beacon tracking to improve connection stability
[+] wifi: rtw89: 8852bt: Use standard helper for string choice
[+] wifi: rtw89: add dummy C2H handlers for BCN resend and update done
[+] wifi: rtw89: print just once for unknown C2H events
[+] wifi: rtw88: Lock rtwdev->mutex before setting the LED
[+] wifi: rtw88: sdio: use indirect IO for device registers before power-on