Single branch specified, using that and the previous one: remotes/brancher/net-next-hw-2025-06-24--08-00 (v6.16-rc2-776-gf29bd7452963) remotes/brancher/net-next-hw-2025-06-24--16-00 (v6.16-rc2-794-gb44223292221) ==== BASE DIFF ==== .../bindings/net/pse-pd/ti,tps23881.yaml | 10 +- drivers/bluetooth/btintel_pcie.c | 33 ++++- drivers/bluetooth/hci_qca.c | 13 +- include/linux/pse-pd/pse.h | 8 +- include/net/bluetooth/hci_core.h | 2 + net/bluetooth/hci_core.c | 34 ++++- net/bluetooth/l2cap_core.c | 9 +- net/unix/af_unix.c | 31 +++-- tools/testing/selftests/net/af_unix/msg_oob.c | 142 ++++++++++++++++++++- 9 files changed, 255 insertions(+), 27 deletions(-) ==== COMMIT DIFF ==== diff --git a/tmp/tmp.15DTIe7h5X b/tmp/tmp.nSAaLbI2v3 index 5be28514a098..e715ea86f385 100644 --- a/tmp/tmp.15DTIe7h5X +++ b/tmp/tmp.nSAaLbI2v3 @@ -7,11 +7,50 @@ selftests: net: enable profiling tc_action dbg profile patch forwarding: set timeout to 3 hours +checkpatch: check for comment explaining rgmii(|-rxid|-txid) PHY modes +net: ethernet: ti: am65-cpsw: fixup PHY mode for fixed RGMII TX delay +dt-bindings: net: ti: k3-am654-cpsw-nuss: update phy-mode in example +xfrm: Duplicate SPI Handling +net: thunderbolt: Enable e2e flow control in two direction +net: txgbe: fix the issue of TX failture +net: ngbe: specify IRQ vector when the number of VFs is 7 +net: wangxun: revert the adjustment of the IRQ vector sequence +net: txgbe: request MISC IRQ in ndo_open +ARM: dts: Fix up wrv54g device tree +dt-bindings: dsa: Rewrite Micrel KS8995 in schema +atm: idt77252: Add missing `dma_map_error()` +selftests/tc-testing: Add tests for restrictions on netem duplication +net/sched: Restrict conditions for adding duplicating netems to qdisc tree +net: bonding: send peer notify when failure recovery +net: bonding: add broadcast_neighbor netlink option +net: bonding: add broadcast_neighbor option for 802.3ad +netfilter: nf_tables: Remove unused nft_reduce_is_readonly() +net/sched: Remove unused functions +neighbour: Remove redundant assignment to err +selftests: drv-net: test RSS Netlink notifications +doc: ethtool: mark ETHTOOL_GRXFHINDIR as reimplemented +net: ethtool: rss: add notifications +net: ethtool: copy req_info from SET to NTF +net: ethtool: remove the data argument from ethtool_notify() +net: ethtool: call .parse_request for SET handlers +net: ethtool: dynamically allocate full req size req +netlink: specs: add the multicast group name to spec bnxt: properly flush XDP redirect lists e1000e: ignore factory-default checksum value on TGP platform e1000e: disregard NVM checksum on tgp when valid checksum mask is not set rds: Expose feature parameters via sysfs (and ELF) team: replace team lock with rtnl lock +net: ti: prueth: Adds PTP OC Support for AM335x and AM437x +net: ti: prueth: Adds support for PRUETH on AM33x and AM43x SOCs +net: ti: prueth: Adds power management support for PRU-ICSS +net: ti: prueth: Adds support for RX interrupt coalescing/pacing +net: ti: prueth: Adds support for network filters for traffic control supported by PRU-ICSS +net: ti: prueth: Adds HW timestamping support for PTP using PRU-ICSS IEP module +net: ti: prueth: Adds ethtool support for ICSSM PRUETH Driver +net: ti: prueth: Adds link detection, RX and TX support. +net: ti: prueth: Adds PRUETH HW and SW configuration +net: ti: prueth: Adds ICSSM Ethernet driver +dt-bindings: net: ti: Adds DUAL-EMAC mode support on PRU-ICSS2 for AM57xx, AM43xx and AM33xx SOCs net: netfilter: Add IPIP flowtable SW acceleration ethernet: cxgb4: Fix dma_unmap_sg() nents value net: xsk: dpaa2: avoid repeatedly updating the global consumer @@ -49,18 +88,6 @@ net/mlx5: HWS, Create STEs directly from matcher net/mlx5: HWS, Refactor and export rule skip logic net/mlx5: HWS, remove incorrect comment net/mlx5: HWS, remove unused create_dest_array parameter -ARM: mxs_defconfig: Enable CONFIG_FEC_MTIP_L2SW to support MTIP L2 switch -ARM: mxs_defconfig: Update mxs_defconfig to 6.16-rc1 -ARM: mxs_defconfig: Enable CONFIG_NFS_FSCACHE -net: mtip: Extend the L2 switch driver for imx287 with bridge operations -net: mtip: Extend the L2 switch driver with management operations -net: mtip: Add mtip_switch_{rx|tx} functions to the L2 switch driver -net: mtip: Add net_device_ops functions to the L2 switch driver -net: mtip: The L2 switch driver for imx287 -ARM: dts: nxp: mxs: Adjust XEA board's DTS to support L2 switch -ARM: dts: nxp: mxs: Adjust the imx28.dtsi L2 switch description -dt-bindings: net: Add MTIP L2 switch description -docs: net: sysctl documentation cleanup tcp: try to avoid safer when ACKs are thinned tcp: accecn: try to fit AccECN option with SACK tcp: accecn: AccECN ACE field multi-wrap heuristic @@ -82,25 +109,3 @@ selftests/tc-testing: Fix warning and style check on tdc.sh sched: Add enqueue/dequeue of dualpi2 qdisc sched: Dump configuration and statistics of dualpi2 qdisc sched: Struct definition and parsing of dualpi2 qdisc -virtio-net: xsk: rx: move the xdp->data adjustment to buf_to_xdp() -virtio-net: xsk: rx: fix the frame's length check -ptp: Convert ptp_open/read() to __free() -ptp: Convert chardev code to lock guards -ptp: Split out PTP_MASK_EN_SINGLE ioctl code -ptp: Split out PTP_MASK_CLEAR_ALL ioctl code -ptp: Split out PTP_PIN_SETFUNC ioctl code -ptp: Split out PTP_PIN_GETFUNC ioctl code -ptp: Split out PTP_SYS_OFFSET ioctl code -ptp: Split out PTP_SYS_OFFSET_EXTENDED ioctl code -ptp: Split out PTP_SYS_OFFSET_PRECISE ioctl code -ptp: Split out PTP_ENABLE_PPS ioctl code -ptp: Split out PTP_PEROUT_REQUEST ioctl code -ptp: Split out PTP_EXTTS_REQUEST ioctl code -ptp: Split out PTP_CLOCK_GETCAPS ioctl code -net: pse-pd: tps23881: Clarify setup_pi_matrix callback documentation -dt-bindings: pse: tps23881: Clarify channels property description -phy: micrel: add Signal Quality Indicator (SQI) support for KSZ9477 switch PHYs -selftest: af_unix: Add tests for -ECONNRESET. -af_unix: Don't set -ECONNRESET for consumed OOB skb. -af_unix: Add test for consecutive consumed OOB. -af_unix: Don't leave consecutive consumed OOB skbs.