Single branch specified, using that and the previous one:
   remotes/brancher/net-next-hw-2025-02-16--16-00 (v6.14-rc2-523-g31589f530bdd)
   remotes/brancher/net-next-hw-2025-02-17--00-00 (v6.14-rc2-520-g45a55544656f)

==== BASE IDENTICAL ====
==== COMMIT DIFF ====
diff --git a/tmp/tmp.NJ9Gbz8Qdz b/tmp/tmp.cH1oJFqHvk
index 9675dd487bd4..444b99674a01 100644
--- a/tmp/tmp.NJ9Gbz8Qdz
+++ b/tmp/tmp.cH1oJFqHvk
@@ -1,37 +1,25 @@
-kunit: try to disable broken and unneccessary tests
-selftests: net: enable profiling
-tc_action dbg
-profile patch
-forwarding: set timeout to 3 hours
-net: xpcs: rearrange register definitions
-ppp: Prevent out-of-bounds access in ppp_sync_txmunge
+selftests: drv-net: Test queue xsk attribute
+netdev-genl: Add an XSK attribute to queues
+netlink: Add nla_put_empty_nest helper
+selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY
 MAINTAINERS: create entry for ethtool MAC merge
 gve: set xdp redirect target only when it is available
-selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY
-net: phy: realtek: add helper RTL822X_VND2_C22_REG
-net: use napi_id_valid helper
-net: phy: marvell-88q2xxx: Init PHY private structure for mv88q211x
-trace: tcp: Add tracepoint for tcp_cwnd_reduction()
-net: phy: marvell-88q2xxx: enable temperature sensor in mv88q2xxx_config_init
-net: phy: marvell-88q2xxx: order includes alphabetically
-net: phy: marvell-88q2xxx: align defines
-ibmvnic: Print data buffers with kernel API's
-hexdump: Use for_each macro in print_hex_dump
-hexdump: Implement macro for converting large buffers
 selftests: test_vxlan_fdb_changelink: Add a test for MC remote change
 selftests: test_vxlan_fdb_changelink: Convert to lib.sh
 selftests: forwarding: lib: Move require_command to net, generalize
 vxlan: Join / leave MC group after remote changes
 vxlan: Drop 'changelink' parameter from vxlan_dev_configure()
-ibmvnic: Don't reference skb after sending to VIOS
-net: phy: dp83822: Add support for changing the transmit amplitude voltage
-net: phy: Add helper for getting tx amplitude gain
-dt-bindings: net: ethernet-phy: add property tx-amplitude-100base-tx-percent
-devlink: fix xa_alloc_cyclic error handling
 s390/ism: add release function for struct device
-Documentation: net: phy: Elaborate on RGMII delay handling
 net: dsa: rtl8366rb: Fix compilation problem
 page_pool: avoid infinite loop to schedule delayed worker
+selftests: net: fix grammar in reuseaddr_ports_exhausted.c log message
+drop_monitor: fix incorrect initialization order
+arp: switch to dev_getbyhwaddr() in arp_req_set_public()
+net: Add non-RCU dev_getbyhwaddr() helper
+selftest/bpf: Add vsock test for sockmap rejecting unconnected
+selftest/bpf: Adapt vsock_delete_on_close to sockmap rejecting unconnected
+vsock/bpf: Warn on socket without transport
+sockmap, vsock: For connectible sockets allow only connected
 net/mlx5: Add sensor name to temperature event message
 net/mlx5: Modify LSB bitmask in temperature event to include only the first bit
 net/mlx5: Prefix temperature event bitmap with '0x' for clarity
@@ -41,3 +29,12 @@ net: phy: mediatek: Add token ring clear bit operation support
 net: phy: mediatek: Add token ring set bit operation support
 net: phy: mediatek: Add token ring access helper functions in mtk-phy-lib
 net: phy: mediatek: Change to more meaningful macros
+eth: mlx4: use the page pool for Rx buffers
+eth: mlx4: remove the local XDP fast-recycling ring
+eth: mlx4: don't try to complete XDP frames in netpoll
+eth: mlx4: create a page pool for Rx
+mips: dts: cameo-rtl9302c: Add switch block
+mips: dts: realtek: Add switch interrupts
+dt-bindings: net: Add Realtek MDIO controller
+dt-bindings: net: Add switch ports and interrupts to RTL9300
+dt-bindings: net: Move realtek,rtl9301-switch to net