Single branch specified, using that and the previous one:
   remotes/brancher/net-next-2025-11-03--12-00 (v6.18-rc3-751-g3a33bb16683e)
   remotes/brancher/net-next-2025-11-03--15-00 (v6.18-rc3-751-g535e9a19ad85)

==== BASE IDENTICAL ====
==== COMMIT DIFF ====
diff --git a/tmp/tmp.JekBKE7rgq b/tmp/tmp.c72SxZCE1A
index 276c41659a7e..cc13cf779b67 100644
--- a/tmp/tmp.JekBKE7rgq
+++ b/tmp/tmp.c72SxZCE1A
@@ -12,6 +12,19 @@ nipa: config: x86: use periodic HZ tick
 nipa: disable 6.17's merge window kunit tests
 nipa: disable random kunit tests
 nipa: fbnic: link up on QEMU
+net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
+net: dsa: add driver for MaxLinear GSW1xx switch family
+net: dsa: add tagging driver for MaxLinear GSW1xx switch family
+dt-bindings: net: dsa: lantiq,gswip: add support for MaxLinear GSW1xx switches
+net: dsa: lantiq_gswip: allow adjusting MII delays
+dt-bindings: net: dsa: lantiq,gswip: add support for MII delay properties
+net: dsa: lantiq_gswip: add vendor property to setup MII refclk output
+dt-bindings: net: dsa: lantiq,gswip: add MaxLinear RMII refclk output property
+net: dsa: lantiq_gswip: define and use GSWIP_TABLE_MAC_BRIDGE_VAL1_VALID
+net: dsa: lantiq_gswip: set link parameters also for CPU port
+net: dsa: lantiq_gswip: support Energy Efficient Ethernet
+net: dsa: lantiq_gswip: support enable/disable learning
+net: dsa: lantiq_gswip: split into common and MMIO parts
 net: altera-tse: Init PCS and phylink before registering netdev
 net: altera-tse: Don't use netdev name for the PCS mdio bus
 net: altera-tse: Warn on bad revision at probe time
@@ -79,18 +92,6 @@ net, ethtool: Disallow peered real rxqs to be resized
 net: Add peer info to queue-get response
 net: Implement netdev_nl_bind_queue_doit
 net: Add bind-queue operation
-net: dsa: add driver for MaxLinear GSW1xx switch family
-net: dsa: add tagging driver for MaxLinear GSW1xx switch family
-dt-bindings: net: dsa: lantiq,gswip: add support for MaxLinear GSW1xx switches
-net: dsa: lantiq_gswip: allow adjusting MII delays
-dt-bindings: net: dsa: lantiq,gswip: add support for MII delay properties
-net: dsa: lantiq_gswip: add vendor property to setup MII refclk output
-dt-bindings: net: dsa: lantiq,gswip: add MaxLinear RMII refclk output property
-net: dsa: lantiq_gswip: define and use GSWIP_TABLE_MAC_BRIDGE_VAL1_VALID
-net: dsa: lantiq_gswip: set link parameters also for CPU port
-net: dsa: lantiq_gswip: support Energy Efficient Ethernet
-net: dsa: lantiq_gswip: support enable/disable learning
-net: dsa: lantiq_gswip: split into common and MMIO parts
 net: stmmac: socfpga: Add hardware supported cross-timestamp
 net: stmmac: socfpga: Enable TSO for Agilex5 platform
 net: stmmac: socfpga: Enable TBS support for Agilex5
@@ -112,7 +113,6 @@ net: ionic: add dma_wmb() before ringing TX doorbell
 net: dsa: microchip: Fix a link check in ksz9477_pcs_read()
 net: phy: micrel: lan8842 errata
 net: phy: micrel: lan8842 errata
-atm: solos-pci: Use pointer from memcpy() call for assignment in fpga_tx()
 net: mdio: improve reset handling in mdio_device.c
 net: mdio: common handling of phy device reset properties
 net: mdio: move device reset functions to mdio_device.c