@@ -1,91 +1,100 @@
nipa: config: disable kmemleak auto scan
nipa: config: x86: disable GPUs and sound
nipa: drv: net: add timeout
nipa: forwarding: set timeout to 3 hours
nipa: config: disable CPU_MITIGATIONS
nipa: tc_action dbg
nipa: selftests: net: enable profiling
nipa: dbg net/sctp_vrf.sh
nipa: dbg: tests: bonding: print info on failure
nipa: timestamp - try waking
nipa: profile (time) test output
nipa: config: x86: use periodic HZ tick
nipa: disable 6.17's merge window kunit tests
nipa: disable random kunit tests
nipa: fbnic: link up on QEMU
[+] dpaa2-eth: fix the pointer passed to PTR_ALIGN on Tx path
[+] net: bonding: update the slave array for broadcast mode
[+] net: ethernet: ti: am65-cpts: fix timestamp loss due to race conditions
[+] net: Kconfig: discourage drop_monitor enablement
[+] net :ethernet : replace cleanup_module with __exit()
[+] eea: introduce ethtool support
[+] eea: create/destroy rx,tx queues for netdevice open and stop
[+] eea: probe the netdevice and create adminq
[+] eea: introduce ring and descriptor structures
[+] eea: introduce PCI framework
[+] nf_conntrack_ftp: Added nfct_seqadj_ext_add() for ftp's conntrack.
[+] arm64: dts: imx94: add basic NETC nodes and properties
[+] net: enetc: add standalone ENETC support for i.MX94
[+] net: enetc: add basic support for the ENETC with pseudo MAC for i.MX94
[+] net: enetc: add ptp timer binding support for i.MX94
[+] net: enetc: add preliminary i.MX94 NETC blocks control support
[+] dt-bindings: net: ethernet-controller: remove the enum values of speed
[+] dt-bindings: net: enetc: add compatible string for ENETC with pseduo MAC
[+] dt-bindings: net: netc-blk-ctrl: add compatible string for i.MX94 platforms
Documentation: net: net_failover: Separate cloud-ifupdown-helper and reattach-vf.sh code blocks marker
net: rmnet: Use section heading for packet format subsections
net: enetc: correct the value of ENETC_RXB_TRUESIZE
page_pool: check if nmdesc->pp is !NULL to confirm its usage as pp for net_iov
[-] net/smc: add full IPv6 support for SMC
selftest: packetdrill: Import client_synack-data.pkt.
tcp: Don't acknowledge SYN+ACK payload to TFO fallback client.
selftest: packetdrill: Import TFO sendto tests.
tcp: Make TFO client fallback behaviour consistent.
nl802154: fix some kernel-doc warnings
net: bridge: use common function to compute the features
team: use common function to compute the features
bonding: use common function to compute the features
net: add a common function to compute features for upper devices
[-] net/mlx5: E-Switch, support eswitch state
[-] net/mlx5: MPFS, add support for dynamic enable/disable
[-] devlink: Introduce devlink eswitch state
net: shrink napi_skb_cache_put()
net: dsa: lantiq_gswip: treat VID 0 like the PVID
net: dsa: lantiq_gswip: drop untagged on VLAN-aware bridge ports with no PVID
net: dsa: lantiq_gswip: put a more descriptive error print in gswip_vlan_remove()
net: dsa: lantiq_gswip: remove vlan_aware and pvid arguments from gswip_vlan_remove()
net: dsa: lantiq_gswip: disallow changes to privately set up VID 0
net: dsa: lantiq_gswip: permit dynamic changes to VLAN filtering state
net: dsa: lantiq_gswip: remove legacy configure_vlan_while_not_filtering option
net: dsa: lantiq_gswip: merge gswip_vlan_add_unaware() and gswip_vlan_add_aware()
net: dsa: lantiq_gswip: remove duplicate assignment to vlan_mapping.val[0]
net: dsa: lantiq_gswip: define VLAN ID 0 constant
net: dsa: lantiq_gswip: support bridge FDB entries on the CPU port
rtnetlink: Allow deleting FDB entries in user namespace
dt-bindings: net: qcom: ethernet: Add interconnect properties
net: stmmac: rename stmmac_phy_setup() to include phylink
net: stmmac: rearrange tc_init()
net: stmmac: avoid PHY speed change when configuring MTU
net: stmmac: place .mac_finish() method more appropriately
net: stmmac: dwc-qos-eth: move MDIO bus locking into stmmac_mdio
net: ravb: Enforce descriptor type ordering to prevent early DMA start
net: ravb: Allocate correct number of queues based on SoC support
net: ravb: Make DBAT entry count configurable per-SoC
net: stmmac: convert to phylink PCS support
net: stmmac: provide PCS initialisation hook
net: stmmac: only call stmmac_pcs_ctrl_ane() for integrated SGMII PCS
net: stmmac: do not require snps,ps-speed for SGMII
net: stmmac: hw->ps becomes hw->reverse_sgmii_enable
net: stmmac: simplify stmmac_check_pcs_mode()
net: stmmac: move reverse-"pcs" mode setup to stmmac_check_pcs_mode()
net: stmmac: remove RGMII "pcs" mode
net: stmmac: remove hw->ps xxx_core_init() hardware setup
net: stmmac: remove unused PCS loopback support
net: stmmac: remove PCS "mode" pause handling
net: stmmac: remove SGMII/RGMII/SMII interrupt handling
net: stmmac: remove xstats.pcs_* members
net: stmmac: remove broken PCS code
[-] net: bonding: update the slave array for broadcast mode
net: stmmac: add Eswin EIC7700 glue driver
dt-bindings: ethernet: eswin: Document for EIC7700 SoC
net: ethtool: tsconfig: Re-configure hwtstamp upon provider change
net: stmmac: Allow supporting coarse adjustment mode
net: stmmac: Move subsecond increment configuration in dedicated helper
net/hsr: add interlink to fill_info output
net: rmnet: Fix checksum offload header v5 and aggregation packet formatting
Octeontx2-af: Fix pci_alloc_irq_vectors() return value check
netdevsim: add ipsec hw_features
net: dsa: tag_brcm: legacy: fix untagged rx on unbridged ports for bcm63xx
net/mlx5e: psp, avoid 'accel' NULL pointer dereference
net: gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
[c] udp: do not use skb_release_head_state() before skb_attempt_defer_free()
[-] net: dwmac-rk: No need to check the return value of phy_power_on()
net: amd-xgbe: use EOPNOTSUPP instead of ENOTSUPP in xgbe_phy_mii_read_c45
net/mlx5e: Return 1 instead of 0 in invalid case in mlx5e_mpwrq_umr_entry_size()
net: usb: rtl8150: Fix frame padding
netpoll: Fix deadlock in memory allocation under spinlock
net: stmmac: dwmac-rk: Fix disabling set_clock_selection
[-] net: dsa: yt921x: Add support for Motorcomm YT921x
[-] net: dsa: tag_yt921x: add support for Motorcomm YT921x tags
[-] dt-bindings: net: dsa: yt921x: Add Motorcomm YT921x switch support