@@ -1,102 +1,118 @@
nipa: config: disable kmemleak auto scan
nipa: config: x86: disable GPUs and sound
nipa: drv: net: add timeout
nipa: forwarding: set timeout to 3 hours
nipa: config: disable CPU_MITIGATIONS
nipa: tc_action dbg
nipa: selftests: net: enable profiling
nipa: dbg net/sctp_vrf.sh
nipa: dbg: tests: bonding: print info on failure
nipa: timestamp - try waking
nipa: profile (time) test output
nipa: config: x86: use periodic HZ tick
nipa: disable 6.17's merge window kunit tests
nipa: disable random kunit tests
nipa: fbnic: link up on QEMU
[+] net: bonding: update the slave array for broadcast mode
[+] net: ethtool: tsconfig: Re-configure hwtstamp upon provider change
[+] net: stmmac: Allow supporting coarse adjustment mode
[+] net: stmmac: Move subsecond increment configuration in dedicated helper
[+] net/hsr: add interlink to fill_info output
[+] Documentation: net: net_failover: Separate cloud-ifupdown-helper and reattach-vf.sh code blocks marker
[+] net: rmnet: Fix checksum offload header v5 and aggregation packet formatting
[+] Octeontx2-af: Fix pci_alloc_irq_vectors() return value check
[+] netdevsim: add ipsec hw_features
[+] hinic3: Use array_size instead of multiplying
[+] hinic3: Remove redundant defensive code
[+] hinic3: Fix code Style(remove empty lines between error handling)
[+] hinic3: Fix netif_queue_set_napi queue_index parameter passing error
[+] hinic3: Add netdev register interfaces
[+] hinic3: Add mac filter ops
[+] hinic3: Add NIC configuration ops
[+] hinic3: Add PF management interfaces
[+] hinic3: Add PF framework
net: dsa: tag_brcm: legacy: fix untagged rx on unbridged ports for bcm63xx
net/mlx5e: psp, avoid 'accel' NULL pointer dereference
net: gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
net: dwmac-rk: No need to check the return value of phy_power_on()
dpaa2-eth: treat skb with exact headroom as scatter/gather frames
net: amd-xgbe: use EOPNOTSUPP instead of ENOTSUPP in xgbe_phy_mii_read_c45
net/mlx5e: Return 1 instead of 0 in invalid case in mlx5e_mpwrq_umr_entry_size()
net: usb: rtl8150: Fix frame padding
tg3: prevent use of uninitialized remote_adv and local_adv variables
netpoll: Fix deadlock in memory allocation under spinlock
net: stmmac: dwmac-rk: Fix disabling set_clock_selection
can: j1939: add missing calls in NETDEV_UNREGISTER notification handler
can: add Transmitter Delay Compensation (TDC) documentation
can: remove false statement about 1:1 mapping between DLC and length
can: m_can: replace Dong Aisheng's old email address
can: m_can: fix CAN state in system PM
can: m_can: m_can_chip_config(): bring up interface in correct state
can: m_can: m_can_handle_state_errors(): fix CAN state transition to Error Active
can: m_can: m_can_plat_remove(): add missing pm_runtime_disable()
can: gs_usb: gs_make_candev(): populate net_device->dev_port
can: gs_usb: increase max interface to U8_MAX
netdevsim: set the carrier when the device goes up
selftests: tls: add test for short splice due to full skmsg
selftests: net: tls: add tests for cmsg vs MSG_MORE
tls: don't rely on tx_work during send()
tls: wait for pending async decryptions if tls_strp_msg_hold fails
tls: always set record_type in tls_process_cmsg
tls: wait for async encrypt in case of error during latter iterations of sendmsg
tls: trim encrypted message to match the plaintext on short splice
net: dsa: yt921x: Add support for Motorcomm YT921x
net: dsa: tag_yt921x: add support for Motorcomm YT921x tags
dt-bindings: net: dsa: yt921x: Add Motorcomm YT921x switch support
[c] gve: Check valid ts bit on RX descriptor before hw timestamping
bonding: Selftest and documentation for the arp_ip_target parameter.
bonding: Update for extended arp_ip_target format.
bonding: Update to bond_arp_send_all() to use supplied vlan tags
bonding: Processing extended arp_ip_target from user space.
bonding: arp_ip_target helpers.
bonding: Adding extra_len field to struct bond_opt_value.
bonding: Adding struct bond_arp_target
dt-bindings: net: Convert amd,xgbe-seattle-v1a to DT schema
net: fbnic: Allow builds for all 64 bit architectures
net: fbnic: Fix page chunking logic when PAGE_SIZE > 4K
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
net: bcmasp: Add support for PHY-based Wake-on-LAN
tcp: accecn: enable AccECN
tcp: accecn: detect loss ACK w/ AccECN option and add TCP_ACCECN_OPTION_PERSIST
tcp: accecn: verify ACE counter in 1st ACK after AccECN negotiation
tcp: accecn: fallback outgoing half link to non-AccECN
tcp: accecn: unset ECT if receive or send ACE=0 in AccECN negotiaion
tcp: accecn: retransmit SYN/ACK without AccECN option or non-AccECN SYN/ACK
tcp: move increment of num_retrans
tcp: accecn: retransmit downgraded SYN in AccECN negotiation
tcp: accecn: handle unexpected AccECN negotiation feedback
tcp: disable RFC3168 fallback identifier for CC modules
tcp: L4S ECT(1) identifier and NEEDS_ACCECN for CC modules
gro: flushing when CWR is set negatively affects AccECN
tcp: try to avoid safer when ACKs are thinned
net: allow busy connected flows to switch tx queues
net: add /proc/sys/net/core/txq_reselection_ms control
net: control skb->ooo_okay from skb_set_owner_w()
net: add SK_WMEM_ALLOC_BIAS constant
[c] tcp: better handle TCP_TX_DELAY on established flows
Documentation: networking: Document the phy_port infrastructure
net: phy: dp83822: Add SFP support through the phy_port interface
net: phy: Only rely on phy_port for PHY-driven SFP
net: phy: qca807x: Support SFP through phy_port interface
net: phy: at803x: Support SFP through phy_port interface
net: phy: marvell10g: Support SFP through phy_port
net: phy: marvell: Support SFP through phy_port interface
net: phy: marvell-88x2222: Support SFP through phy_port interface
net: phy: Introduce generic SFP handling for PHY drivers
net: phy: Create a phy_port for PHY-driven SFPs
dt-bindings: net: dp83822: Deprecate ti,fiber-mode
net: phy: dp83822: Add support for phy_port representation
net: phy: Introduce PHY ports representation
net: ethtool: Introduce ETHTOOL_LINK_MEDIUM_* values
net: ethtool: common: Indicate that BaseT works on up to 4 lanes
dt-bindings: net: Introduce the ethernet-connector description
net: pse-pd: pd692x0: Preserve PSE configuration across reboots
net: pse-pd: pd692x0: Separate configuration parsing from hardware setup
net: pse-pd: pd692x0: Replace __free macro with explicit kfree calls
net: airoha: npu: Add 7583 SoC support
net: airoha: npu: Add airoha_npu_soc_data struct
dt-bindings: net: airoha: npu: Add AN7583 support
net: cxgb4/ch_ipsec: fix potential use-after-free in ch_ipsec_xfrm_add_state() callback