@@ -1,178 +1,137 @@
nipa: config: disable kmemleak auto scan
nipa: config: x86: disable GPUs and sound
nipa: drv: net: add timeout
nipa: forwarding: set timeout to 3 hours
nipa: config: disable CPU_MITIGATIONS
nipa: tc_action dbg
nipa: selftests: net: enable profiling
nipa: dbg: tests: bonding: print info on failure
nipa: timestamp - try waking
nipa: profile (time) test output
nipa: config: x86: use periodic HZ tick
nipa: disable 6.17's merge window kunit tests
nipa: dbg net/sctp_vrf.sh
nipa: disable random kunit tests
[-] sfc: remove ASSERT_RTNL() from get_ts_info function
[+] net: macb: Fix offset error in gem_update_stats
[+] net: stmmac: sun8i: drop unneeded default syscon value
[+] MAINTAINERS: retire Boris from TLS maintainers
[+] sfc: use kmalloc_array() instead of kmalloc()
[+] net/mlx5e: Set local Xoff after FW update
[+] net/mlx5e: Update and set Xon/Xoff upon port speed set
[+] net/mlx5e: Update and set Xon/Xoff upon MTU set
[+] net/mlx5: Prevent flow steering mode changes in switchdev mode
[+] net/mlx5: Nack sync reset when SFs are present
[+] net/mlx5: Fix lockdep assertion on sync reset unload event
[+] net/mlx5: Reload auxiliary drivers on fw_activate
[+] net/mlx5: HWS, Fix pattern destruction in mlx5hws_pat_get_pattern error path
[+] net/mlx5: HWS, Fix uninitialized variables in mlx5hws_pat_calc_nop error flow
[+] net/mlx5: HWS, Fix memory leak in hws_action_get_shared_stc_nic error flow
[+] net/mlx5: HWS, Fix memory leak in hws_pool_buddy_init error path
[+] net: hns3: use kcalloc() instead of kzalloc()
docs: networking: clarify expectation of persistent stats
ipv4: Convert ->flowi4_tos to dscp_t.
net: hv_netvsc: fix loss of early receive events from host during channel open.
ptp: Limit time setting of PTP clocks
net: mana: Remove redundant netdev_lock_ops_to_full() calls
net: stmmac: imx: add i.MX91 support
arm64: dts: imx93-11x11-evk: remove fec property eee-broken-1000t
arm64: dts: freescale: add i.MX91 11x11 EVK basic support
arm64: dts: imx91: add i.MX91 dtsi support
arm64: dts: freescale: rename imx93.dtsi to imx91_93_common.dtsi and modify them
arm64: dts: freescale: move aliases from imx93.dtsi to board dts
[-] phy: rockchip-pcie: switch to FIELD_PREP_WM16 macro
[-] clk: sp7021: switch to FIELD_PREP_WM16 macro
[-] PM / devfreq: rockchip-dfi: switch to FIELD_PREP_WM16 macro
[-] PCI: dw-rockchip: Switch to FIELD_PREP_WM16 macro
[-] PCI: rockchip: Switch to FIELD_PREP_WM16* macros
[-] net: stmmac: dwmac-rk: switch to FIELD_PREP_WM16 macro
[-] ASoC: rockchip: i2s-tdm: switch to FIELD_PREP_WM16_CONST macro
[-] drm/rockchip: dw_hdmi: switch to FIELD_PREP_WM16* macros
[-] phy: rockchip-usb: switch to FIELD_PREP_WM16 macro
[-] drm/rockchip: inno-hdmi: switch to FIELD_PREP_WM16 macro
[-] drm/rockchip: dw_hdmi_qp: switch to FIELD_PREP_WM16 macro
[-] phy: rockchip-samsung-dcphy: switch to FIELD_PREP_WM16 macro
[-] drm/rockchip: vop2: switch to FIELD_PREP_WM16 macro
[-] drm/rockchip: dsi: switch to FIELD_PREP_WM16* macros
[-] phy: rockchip-emmc: switch to FIELD_PREP_WM16 macro
[-] drm/rockchip: lvds: switch to FIELD_PREP_WM16 macro
[-] media: synopsys: hdmirx: replace macros with bitfield variants
[-] soc: rockchip: grf: switch to FIELD_PREP_WM16_CONST macro
[-] mmc: dw_mmc-rockchip: switch to FIELD_PREP_WM16 macro
[-] bitmap: introduce hardware-specific bitfield operations
phy: mscc: Fix when PTP clock is register and unregister
selftests: bonding: add test for LACP actor port priority
bonding: support aggregator selection based on port priority
bonding: add support for per-port LACP actor priority
[-] net: phy: micrel: Add PTP support for lan8842
[-] net: phy: micrel: Introduce function __lan8814_ptp_probe_once
net: devmem: allow binding on rx queues with same DMA devices
net: devmem: pre-read requested rx queues during bind
net: devmem: pull out dma_dev out of net_devmem_bind_dmabuf
net/mlx5e: add op for getting netdev DMA device
net: devmem: get netdev DMA device via new API
io_uring/zcrx: add support for custom DMA devices
queue_api: add support for fetching per queue DMA dev
net: stmmac: Set CIC bit only for TX queues with COE
net: stmmac: xgmac: Correct supported speed modes
net: stmmac: xgmac: Do not enable RX FIFO Overflow interrupts
[-] arm64: dts: imx95: add standard PCI device compatible string to NETC Timer
[-] net: enetc: don't update sync packet checksum if checksum offload is used
[-] net: enetc: add PTP synchronization support for ENETC v4
[-] net: enetc: remove unnecessary CONFIG_FSL_ENETC_PTP_CLOCK check
[-] net: enetc: extract enetc_update_ptp_sync_msg() to handle PTP Sync packets
[-] net: enetc: save the parsed information of PTP packet to skb->cb
[-] MAINTAINERS: add NETC Timer PTP clock driver section
[-] ptp: netc: add debugfs support to loop back pulse signal
[-] ptp: netc: add external trigger stamp support
[-] ptp: netc: add periodic pulse output support
[-] ptp: netc: add PTP_CLK_REQ_PPS support
[-] ptp: netc: add NETC V4 Timer PTP driver support
[-] ptp: add helpers to get the phc_index by of_node or dev
[-] dt-bindings: net: move ptp-timer property to ethernet-controller.yaml
[-] dt-bindings: ptp: add NETC Timer PTP clock
net: Cache hash and flow_id to avoid recalculation
net: Prevent RPS table overwrite of active flows
net/cls_cgroup: Fix task_get_classid() during qdisc run
[-] Fixes: xircom auto-negoation timer
net: mtip: Extend the L2 switch driver for imx287 with bridge operations
net: mtip: Extend the L2 switch driver with management operations
net: mtip: Add mtip_switch_{rx|tx} functions to the L2 switch driver
net: mtip: Add net_device_ops functions to the L2 switch driver
net: mtip: Add buffers management functions to the L2 switch driver
net: mtip: The L2 switch driver for imx287
dt-bindings: net: Add MTIP L2 switch description
net/mlx5e: Set default burst period for TX and RX reporters
devlink: Make health reporter burst period configurable
devlink: Introduce burst period for health reporter
devlink: Move health reporter recovery abort logic to a separate function
devlink: Move graceful period parameter to reporter ops
ipv6: sr: Prepare HMAC key ahead of time
ipv6: sr: Use HMAC-SHA1 and HMAC-SHA256 library functions
net: phylink: remove stale an_enabled from doc
net: phy: fixed_phy: let fixed_phy_unregister free the phy_device
net: dlink: fix multicast stats being counted incorrectly
net: phy: as21xxx: better handle PHY HW reset on soft-reboot
net: phy: introduce phy_id_compare_vendor() PHY ID helper
[-] net: dsa: b53: fix ageing time for BCM53101
net: rose: include node references in rose_neigh refcount
net: rose: convert 'use' field to refcount_t
net: rose: split remove and free operations in rose_remove_neigh()
net: airoha: Introduce check_skb callback in ppe_dev ops
net: airoha: Add airoha_ppe_dev struct definition
net: airoha: Rely on airoha_eth struct in airoha_ppe_flow_offload_cmd signature
net: phy: fixed: let fixed_phy_add always use addr 0 and remove return value
[c] selftests: drv-net: xdp: make sure we're actually testing native XDP
tcp: Move TCP-specific diag functions to tcp_diag.c.
tcp: Don't pass hashinfo to inet_diag helpers.
tcp: Don't pass hashinfo to socket lookup helpers.
tcp: Remove hashinfo test for inet6?_lookup_run_sk_lookup().
tcp: Remove timewait_sock_ops.twsk_destructor().
tcp: Remove sk_protocol test for tcp_twsk_unique().
mISDN: hfcpci: Fix warning when deleting uninitialized timer
net: phy: mxl-86110: add basic support for MxL86111 PHY
net: phy: mxl-86110: fix indentation in struct phy_driver
net: phy: mxl-86110: add basic support for led_brightness_set op
net: dsa: lantiq_gswip: store switch API version in priv
net: dsa: lantiq_gswip: make DSA tag protocol model-specific
net: dsa: lantiq_gswip: load model-specific microcode
net: dsa: lantiq_gswip: introduce bitmap for MII ports
net: dsa: lantiq_gswip: move definitions to header
net: dsa: lantiq_gswip: prepare for more CPU port options
net: dsa: lantiq_gswip: deduplicate dsa_switch_ops
net: pse-pd: pd692x0: Add sysfs interface for configuration save/reset
net: pse-pd: pd692x0: Separate configuration parsing from hardware setup
selftests: rtnetlink: skip tests if tools or feats are missing
net: ti: icssm-prueth: Adds IEP support for PRUETH on AM33x, AM43x and AM57x SOCs
net: ti: icssm-prueth: Adds link detection, RX and TX support.
net: ti: icssm-prueth: Adds PRUETH HW and SW configuration
net: ti: icssm-prueth: Adds ICSSM Ethernet driver
dt-bindings: net: ti: Adds DUAL-EMAC mode support on PRU-ICSS2 for AM57xx, AM43xx and AM33xx SOCs
[-] net: af_packet: Use hrtimer to do the retire operation
Octeontx2-af: Fix NIX X2P calibration failures
amd-xgbe: Add PPS periodic output support
arm64: dts: broadcom: Enable RP1 ethernet for Raspberry Pi 5
arm64: dts: rp1: Add ethernet DT node
net: cadence: macb: Add support for Raspberry Pi RP1 ethernet controller
dt-bindings: net: cdns,macb: Add compatible for Raspberry Pi RP1
net: cadence: macb: Set upper 32bits of DMA ring buffer
net: usb: lan78xx: add support for generic net selftests via ethtool
tcp: annotate data-races around icsk->icsk_probes_out
tcp: annotate data-races around icsk->icsk_retransmits
net: usb: qmi_wwan: add Telit Cinterion LE910C4-WWX new compositions
microchip: lan865x: add ndo_eth_ioctl handler to enable PHY ioctl support
ipv6: mcast: Add ip6_mc_find_idev() helper
ppp: remove rwlock usage
net/mlx5: {DR,HWS}, Use the cached vhca_id for this device
net/mlx5: E-switch, Set representor attributes for adjacent VFs
net/mlx5: E-Switch, Register representors for adjacent vports
net/mlx5: E-Switch, Create acls root namespace for adjacent vports
net/mlx5: E-Switch, Add support for adjacent functions vports discovery
net/mlx5: E-Switch, Move vport acls root namespaces creation to eswitch
net/mlx5: FS, Convert vport acls root namespaces to xarray
[c] net: phy: aquantia: add support for AQR115
[c] net: phy: aquantia: promote AQR813 and AQR114C to aqr_gen4_config_init()
[c] net: phy: aquantia: rename aqr113c_config_init() to aqr_gen4_config_init()
[c] net: phy: aquantia: reimplement aqcs109_config_init() as aqr_gen2_config_init()
[c] net: phy: aquantia: call aqr_gen3_config_init() for AQR112 and AQR412(C)
[c] net: phy: aquantia: call aqr_gen2_fill_interface_modes() for AQCS109
[c] net: phy: aquantia: merge and rename aqr105_read_status() and aqr107_read_status()
[c] net: phy: aquantia: use cached GLOBAL_CFG registers in aqr107_read_rate()
[c] net: phy: aquantia: remove handling for get_rate_matching(PHY_INTERFACE_MODE_NA)
[c] net: phy: aquantia: save a local shadow of GLOBAL_CFG register values
[c] net: phy: aquantia: fill supported_interfaces for all aqr_gen2_config_init() callers
[c] net: phy: aquantia: rename some aqr107 functions according to generation
[c] net: phy: aquantia: reorder AQR113C PMD Global Transmit Disable bit clearing with supported_interfaces
[c] net: phy: aquantia: merge aqr113c_fill_interface_modes() into aqr107_fill_interface_modes()
[c] net: phy: aquantia: rename AQR412 to AQR412C and add real AQR412
ibmvnic: Increase max subcrq indirect entries with fallback
ptp/ptp_vmw: load ptp_vmw driver by directly probing the device
ptp/ptp_vmw: Implement PTP clock adjustments ops
octeontx2-af: Remove unused declarations
i40e: Prevent unwanted interface name changes
selftests: net: add test for dst hint mechanism with directed broadcast addresses
net: ipv4: allow directed broadcast routes to use dst hint