NIPA Branch net-next-2025-08-16--00-00

Branches
Base trees

No differences found.

New patches
@@ -1,133 +1,141 @@
nipa: config: disable kmemleak auto scan
nipa: config: x86: disable GPUs and sound
nipa: drv: net: add timeout
nipa: forwarding: set timeout to 3 hours
nipa: config: disable CPU_MITIGATIONS
nipa: tc_action dbg
nipa: selftests: net: enable profiling
nipa: dbg: tests: bonding: print info on failure
nipa: timestamp - try waking
nipa: profile (time) test output
nipa: config: x86: use periodic HZ tick
nipa: disable 6.17's merge window kunit tests
nipa: dbg net/sctp_vrf.sh
nipa: disable random kunit tests
[+] selftests: drv-net: ncdevmem: make configure_channels() support combined channels
[+] selftests: drv-net: tso: increase the retransmit threshold
[+] igc: fix disabling L1.2 PCI-E link substate on I226 on init
[+] ixgbe: fix ndo_xdp_xmit() workloads
[+] ixgbe: xsk: resolve the negative overflow of budget in ixgbe_xmit_zc
[+] ice: fix Rx page leak on multi-buffer frames
[+] ice: fix possible leak in ice_plug_aux_dev() error path
[+] ice: fix NULL pointer dereference in ice_unplug_aux_dev() on reset
net: dsa: b53: fix reserved register access in b53_fdb_dump()
selftests: mptcp: sockopt: fix C23 extension warning
selftests: mptcp: connect: fix C23 extension warning
selftests: mptcp: disable add_addr retrans in endpoint_tests
mptcp: disable add_addr retransmission when timeout is 0
mptcp: remove duplicate sk_reset_timer call
selftests: mptcp: pm: check flush doesn't reset limits
mptcp: pm: kernel: flush: do not reset ADD_ADDR limit
mptcp: drop skb if MPTCP skb extension allocation fails
net: stmmac: Set CIC bit only for TX queues with COE
net: stmmac: xgmac: Correct supported speed modes
net: stmmac: xgmac: Do not enable RX FIFO Overflow interrupts
docs: netdev: refine the clean-up patch examples
net: pktgen: Use min()/min_t() to improve pktgen_finalize_skb()
arm64: dts: broadcom: Enable RP1 ethernet for Raspberry Pi 5
arm64: dts: rp1: Add ethernet DT node
net: cadence: macb: Add support for Raspberry Pi RP1 ethernet controller
dt-bindings: net: cdns,macb: Add compatible for Raspberry Pi RP1
net: cadence: macb: Set upper 32bits of DMA ring buffer
net/sched: sch_dualpi2: Run prob update timer in softirq to avoid deadlock
net: stmmac: explain the phylink_speed_down() call in stmmac_release()
net: stmmac: add helpers to indicate WoL enable status
net: stmmac: use core wake IRQ support
net: stmmac: remove unnecessary "stmmac: wakeup enable" print
net: stmmac: remove redundant WoL option validation
net: stmmac: remove write-only mac->pmt
net: stmmac: remove unnecessary checks in ethtool eee ops
net: stmmac: thead: Enable TX clock before MAC initialization
net: hns3: change the function return type from int to bool
net: hns3: add parameter check for tx_copybreak and tx_spare_buf_size
tcp: accecn: try to fit AccECN option with SACK
tcp: accecn: AccECN option ceb/cep and ACE field multi-wrap heuristics
tcp: accecn: AccECN option failure handling
tcp: accecn: AccECN option send control
tcp: accecn: AccECN option
tcp: sack option handling improvements
tcp: accecn: AccECN needs to know delivered bytes
tcp: accecn: add AccECN rx byte counters
tcp: accecn: AccECN negotiation
tcp: AccECN core
tcp: ecn functions in separated include file
tcp: reorganize tcp_sock_write_txrx group for variables later
tcp: fast path functions later
tcp: reorganize SYN ECN code
net: phy: realtek: enable serdes option mode for RTL8226-CG
ipv6: sr: validate HMAC algorithm ID in seg6_hmac_info_add
selftests: bonding: add test for passive LACP mode
bonding: send LACPDUs periodically in passive mode after receiving partner's LACPDU
bonding: update LACP activity flag after setting lacp_active
selftests net/socket.c: removed warnings from unused returns
qed: Don't write past the end of GRC debug buffer
net: ethernet: stmmac: dwmac-rk: Make the clk_phy could be used for external phy
nfc: s3fwrn5: Use SHA-1 library instead of crypto_shash
ppp: mppe: Use SHA-1 library instead of crypto_shash
eth: nfp: Remove u64_stats_update_begin()/end() for stats fetch
selftests: drv-net: test the napi init state
hinic3: Interrupt request configuration
hinic3: Mailbox management interfaces
hinic3: Mailbox framework
hinic3: TX & RX Queue coalesce interfaces
hinic3: Command Queue interfaces
hinic3: Command Queue framework
hinic3: Complete Event Queue interfaces
hinic3: Async Event Queue interfaces
ice: Implement support for SRIOV VFs across Active/Active bonds
ice: cleanup capabilities evaluation
ice: Cleanup variable initialization in LAG code
ice: move LAG function in code to prepare for Active-Active
ice: Add driver specific prefix to LAG defines
ice: replace u8 elements with bool where appropriate
ice: Remove casts on void pointers in LAG code
selftests: tls: make the new data_steal test less flaky
cdc_ncm: Flag Intel OEM version of Fibocom L850-GL as WWAN
selftests: net: add test for dst hint mechanism with directed broadcast addresses
net: ipv4: allow directed broadcast routes to use dst hint
net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.
net: gso: Forbid IPv6 TSO with extensions on devices with only IPV6_CSUM
net: ti: icssg-prueth: Fix HSR and switch offload Enablement during firwmare reload.
net: airoha: Add wlan flowtable TX offload
net: macb: Add capability-based QBV detection and Versal support
net: macb: Add TAPRIO traffic scheduling support
ppp: fix race conditions in ppp_fill_forward_path
net: ethernet: mtk_ppe: add RCU lock around dev_fill_forward_path
eth: fbnic: Report XDP stats via ethtool
eth: fbnic: Collect packet statistics for XDP
eth: fbnic: Add support for XDP_TX action
eth: fbnic: Add support for XDP queues
eth: fbnic: Add XDP pass, drop, abort support
eth: fbnic: Prefetch packet headers on Rx
eth: fbnic: Use shinfo to track frags state on Rx
eth: fbnic: Update Headroom
eth: fbnic: Add support for HDS configuration
net: dsa: ks8995: Add basic switch set-up
net: dsa: ks8995: Delete sysfs register access
net: dsa: ks8995: Add proper RESET delay
net: dsa: Move KS8995 to the DSA subsystem
dpll: zl3073x: Implement devlink flash callback
dpll: zl3073x: Refactor DPLL initialization
dpll: zl3073x: Add firmware loading functionality
dpll: zl3073x: Add low-level flash functions
dpll: zl3073x: Add functions to access hardware registers
dt-bindings: net: realtek,rtl82xx: document wakeup-source property
microchip: lan865x: fix missing configuration for Rev.B0/B1 as per AN1760
microchip: lan865x: fix missing netif_start_queue() call on device open
net: phy: realtek: fix RTL8211F wake-on-lan support
phy: mscc: Fix timestamping for vsc8584
net: mtip: Extend the L2 switch driver for imx287 with bridge operations
net: mtip: Extend the L2 switch driver with management operations
net: mtip: Add mtip_switch_{rx|tx} functions to the L2 switch driver
net: mtip: Add net_device_ops functions to the L2 switch driver
net: mtip: Add buffers management functions to the L2 switch driver
net: mtip: The L2 switch driver for imx287
dt-bindings: net: Add MTIP L2 switch description
sctp: Convert cookie authentication to use HMAC-SHA256
sctp: Use HMAC-SHA1 and HMAC-SHA256 library for chunk authentication
selftests: net: Explicitly enable CONFIG_CRYPTO_SHA1 for IPsec
net/mlx5: Support getcyclesx and getcrosscycles
net/mlx5: Extract MTCTR register read logic into helper function
ptp: Add ioctl commands to expose raw cycle counter values
Test results