@@ -1,194 +1,389 @@
disable random kunit tests [local patch]
profile patch [local patch]
dbg: tests: bonding: print info on failure [local patch]
drv: net: add timeout [local patch]
tc_action dbg [local patch]
forwarding: set timeout to 3 hours [local patch]
selftests: net: enable profiling [local patch]
timestamp - try waking [local patch]
[+] dt-bindings: net: Replace bouncing Alexandru Tachici emails
[+] ipv6: mcast: Add ip6_mc_find_idev() helper
[+] net/core: fix wrong return value in __splice_segment
[+] Octeontx2-pf: ethtool: Display "Autoneg" and "Port" fields
[+] Merge tag 'wireless-next-2025-07-24' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
net: check the minimum value of gso size in virtio_net_hdr_to_skb()
net: wangxun: support to use adaptive RX coalescing
net: wangxun: limit tx_max_coalesced_frames_irq
net: wangxun: change the default ITR setting
selftests: netfilter: ipvs.sh: Explicity disable rp_filter on interface tunl0
[+] net: ti: prueth: Adds IEP support for PRUETH on AM33x, AM43x and AM57x SOCs
[+] net: ti: prueth: Adds link detection, RX and TX support.
[+] net: ti: prueth: Adds PRUETH HW and SW configuration
[+] net: ti: prueth: Adds ICSSM Ethernet driver
[+] dt-bindings: net: ti: Adds DUAL-EMAC mode support on PRU-ICSS2 for AM57xx, AM43xx and AM33xx SOCs
Octeontx2-vf: Fix max packet length errors
selftests: rtnetlink.sh: remove esp4_offload after test
net: dsa: b53: mmap: Implement bcm63xx ephy power control
net: dsa: b53: mmap: Add register layout for bcm6368
net: dsa: b53: mmap: Add register layout for bcm6318
net: dsa: b53: mmap: Add syscon reference and register layout for bcm63268
net: dsa: b53: Define chip IDs for more bcm63xx SoCs
dt-bindings: net: dsa: b53: Document brcm,gpio-ctrl property
net: dsa: b53: Add phy_enable(), phy_disable() methods
selftests: drv-net: add test for RSS on flow label
eth: bnxt: support RSS on IPv6 Flow Label
eth: fbnic: support RSS on IPv6 Flow Label
net: ethtool: support including Flow Label in the flow hash for RSS
usbnet: Set duplex status to unknown in the absence of MII
net: qrtr: mhi: Report endpoint id in sysfs
net: qrtr: ns: support multiple endpoints
net: qrtr: Drop remote {NEW|DEL}_LOOKUP messages
net: qrtr: allow socket endpoint binding
net: qrtr: Allow sendmsg to target an endpoint
net: qrtr: Report endpoint for locally generated messages
net: qrtr: Report sender endpoint in aux data
net: qrtr: support identical node ids
net: qrtr: fit node ID + port number combination into unsigned long
net: qrtr: allocate and track endpoint ids
net: qrtr: ns: validate msglen before ctrl_pkt use
selftests: rtnetlink: add macsec and vlan nesting test
macsec: set IFF_UNICAST_FLT priv flag
vrf: Drop existing dst reference in vrf_ip6_input_dst
net: phy: micrel: fix KSZ8081/KSZ8091 cable test
gve: support unreadable netmem
net: Fix typos
net: mana: Use page pool fragments for RX buffers instead of full pages to improve memory efficiency.
Merge tag 'for-net-next-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
selftests: drv-net: tso: fix non-tunneled tso6 test case name
selftests: drv-net: tso: fix vxlan tunnel flags to get correct gso_type
selftests: drv-net: tso: enable test cases based on hw_features
selftests: net: Skip test if IPv6 is not configured
netconsole: use netpoll_parse_ip_addr in local_ip_store
netconsole: use netpoll_parse_ip_addr in local_ip_store
netconsole: add support for strings with new line in netpoll_parse_ip_addr
netconsole: move netpoll_parse_ip_addr() earlier for reuse
netpoll: Remove unused fields from inet_addr union
net: airoha: Add airoha_offload.h header
net: airoha: npu: Enable core 3 for WiFi offloading
net: airoha: npu: Read NPU wlan interrupt lines from the DTS
net: airoha: npu: Add wlan irq management callbacks
net: airoha: npu: Add wlan_{send,get}_msg NPU callbacks
net: airoha: npu: Add NPU wlan memory initialization commands
dt-bindings: net: airoha: npu: Add memory regions used for wlan offload
selftests: drv-net: devmem: use new mattr ynl helpers
tools: ynl-gen: print setters for multi-val attrs
tools: ynl-gen: print alloc helper for multi-val attrs
tools: ynl-gen: move free printing to the print_type_full() helper
tools: ynl-gen: don't add suffix for pure types
mptcp: remove pr_fallback()
mptcp: track fallbacks accurately via mibs
igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
stmmac: xsk: fix negative overflow of budget in zerocopy mode
selftests: drv-net: Make command requirements explicit
selftests: drv-net: Fix remote command checking in require_cmd()
[-] net: clear offline CPU backlog.state in dev_cpu_dead()
xfrm: Skip redundant statistics update for crypto offload
xfrm: Duplicate SPI Handling
xfrm: hold device only for the asynchronous decryption
net: hibmcge: support for statistics of reset failures
[c] Revert "xfrm: destroy xfrm_state synchronously on net exit path"
[c] xfrm: delete x->tunnel as we delete x
[c] xfrm: interface: fix use-after-free after changing collect_md xfrm interface
[c] xfrm: ipcomp: adjust transport header after decompressing
[c] xfrm: Set transport header to fix UDP GRO handling
[c] xfrm: always initialize offload path
[c] xfrm: state: use a consistent pcpu_id in xfrm_state_find
[c] xfrm: state: initialize state_ptrs earlier in xfrm_state_find
net/mlx5e: Fix potential deadlock by deferring RX timeout recovery
net/mlx5e: Remove skb secpath if xfrm state is not found
net/mlx5e: Clear Read-Only port buffer size in PBMC before update
net: Cache hash and flow_id to avoid recalculation
net: Prevent RPS table overwrite for active flows
net: dsa: microchip: Fix wrong rx drop MIB counter for KSZ8863
net: define an enum for the napi threaded state
net: Use netif_threaded_enable instead of netif_set_threaded in drivers
net: Create separate gro_flush_normal function
[-] net: otx2: handle NULL returned by xdp_convert_buff_to_frame()
[-] sfc: siena: handle NULL returned by xdp_convert_buff_to_frame()
[-] sfc: handle NULL returned by xdp_convert_buff_to_frame()
net/mlx5: Fix build -Wframe-larger-than warnings
sctp: Replace sockaddr with sockaddr_inet in sctp_addr union
wireguard: peer: Replace sockaddr with sockaddr_inet
ipv6: Add sockaddr_inet unified address structure
[c] s390/ism: fix concurrency management in ism_cmd()
net/mlx5e: Expose TIS via devlink tx reporter diagnose
net/mlx5e: Support routed networks during IPsec MACs initialization
[c] net: hns3: default enable tx bounce buffer when smmu enabled
[c] net: hns3: fixed vf get max channels bug
[c] net: hns3: disable interrupt when ptp init failed
[c] net: hns3: fix concurrent setting vlan filter issue
Documentation: networking: Document the phy_port infrastructure
net: phy: dp83822: Add SFP support through the phy_port interface
net: phy: Only rely on phy_port for PHY-driven SFP
net: phy: qca807x: Support SFP through phy_port interface
net: phy: at803x: Support SFP through phy_port interface
net: phy: marvell10g: Support SFP through phy_port
net: phy: marvell: Support SFP through phy_port interface
net: phy: marvell-88x2222: Support SFP through phy_port interface
net: phy: Introduce generic SFP handling for PHY drivers
net: phy: Create a phy_port for PHY-driven SFPs
net: phy: dp83822: Add support for phy_port representation
net: phy: Introduce PHY ports representation
net: ethtool: Introduce ETHTOOL_LINK_MEDIUM_* values
net: ethtool: common: Indicate that BaseT works on up to 4 lanes
dt-bindings: net: Introduce the ethernet-connector description
tcp: accecn: try to fit AccECN option with SACK
tcp: accecn: AccECN option ceb/cep and ACE field multi-wrap heuristics
tcp: accecn: AccECN option failure handling
tcp: accecn: AccECN option send control
tcp: accecn: AccECN option
tcp: sack option handling improvements
tcp: accecn: AccECN needs to know delivered bytes
tcp: accecn: add AccECN rx byte counters
tcp: accecn: AccECN negotiation
tcp: AccECN core
tcp: ecn functions in separated include file
tcp: reorganize tcp_sock_write_txrx group for variables later
tcp: fast path functions later
tcp: reorganize SYN ECN code
ipv6: add `force_forwarding` sysctl to enable per-interface forwarding
net-memcg: Allow decoupling memcg from global protocol memory accounting.
net-memcg: Store memcg->socket_isolated in sk->sk_memcg.
net-memcg: Add memory.socket_isolated knob.
net: Define sk_memcg under CONFIG_MEMCG.
net-memcg: Pass struct sock to mem_cgroup_sk_under_memory_pressure().
net-memcg: Pass struct sock to mem_cgroup_sk_(un)?charge().
net-memcg: Introduce mem_cgroup_sk_enabled().
net-memcg: Introduce mem_cgroup_from_sk().
net: Clean up __sk_mem_raise_allocated().
net: Call trace_sock_exceed_buf_limit() for memcg failure with SK_MEM_RECV.
tcp: Simplify error path in inet_csk_accept().
mptcp: Use tcp_under_memory_pressure() in mptcp_epollin_ready().
mptcp: Fix up subflow's memcg when CONFIG_SOCK_CGROUP_DATA=n.
[+] ssb: use new GPIO line value setter callbacks for the second GPIO chip
[+] wifi: Fix typos
Bluetooth: Add PA_LINK to distinguish BIG sync and PA sync connections
Bluetooth: hci_event: Mask data status from LE ext adv reports
Bluetooth: btintel_pcie: Fix Alive Context State Handling
Bluetooth: btintel_pcie: Make driver wait for alive interrupt
Bluetooth: hci_devcd_dump: fix out-of-bounds via dev_coredumpv
Bluetooth: hci_sync: fix double free in 'hci_discovery_filter_clear()'
Bluetooth: btusb: Add one more ID 0x28de:0x1401 for Qualcomm WCN6855
Bluetooth: btusb: Sort WCN6855 device IDs by VID and PID
Bluetooth: btusb: QCA: Support downloading custom-made firmwares
Bluetooth: btnxpuart: Add uevents for FW dump and FW download complete
Bluetooth: btnxpuart: Correct the Independent Reset handling after FW dump
Bluetooth: ISO: Support SCM_TIMESTAMPING for ISO TS
Bluetooth: ISO: add socket option to report packet seqnum via CMSG
Bluetooth: btintel: Define a macro for Intel Reset vendor command
Bluetooth: Fix typos in comments
Bluetooth: RFCOMM: Fix typos in comments
Bluetooth: aosp: Fix typo in comment
Bluetooth: hci_bcm4377: Fix typo in comment
Bluetooth: btrtl: Fix typo in comment
Bluetooth: btmtk: Fix typo in log string
Bluetooth: btintel: Fix typo in comment
Bluetooth: btusb: Add new VID/PID 0489/e14e for MT7925
Bluetooth: btusb: Add RTL8852BE device 0x13d3:0x3618
Bluetooth: btusb: Fix potential NULL dereference on kmalloc failure
Bluetooth: btnxpuart: implement powerup sequence
dt-bindings: net: bluetooth: nxp: add support for supply and reset
Bluetooth: Fix spelling mistakes
Bluetooth: hci_event: Add support for handling LE BIG Sync Lost event
Bluetooth: btnxpuart: Add support for 4M baudrate
dt-bindings: net: bluetooth: nxp: Add support for 4M baudrate
Bluetooth: hci_event: Correct comment about HCI_EV_EXTENDED_INQUIRY_RESULT
Bluetooth: hci_core: Eliminate an unnecessary goto label in hci_find_irk_by_addr()
Bluetooth: hci_sync: Use bt_dev_err() to log error message in hci_update_event_filter_sync()
Bluetooth: hci_sock: Reset cookie to zero in hci_sock_free_cookie()
Bluetooth: hci_qca: Enable ISO data packet RX
Bluetooth: btintel_pcie: Add support for device 0x4d76
Bluetooth: Remove hci_conn_hash_lookup_state()
Bluetooth: btusb: Add a new VID/PID 2c7c/7009 for MT7925
Bluetooth: btintel_pcie: Reword restart to recovery
Bluetooth: btintel_pcie: Support Function level reset
Bluetooth: btusb: Add support for variant of RTL8851BE (USB ID 13d3:3601)
Bluetooth: btusb: Add USB ID 3625:010b for TP-LINK Archer TX10UB Nano
[+] Merge tag 'iwlwifi-next-2025-07-23' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
[+] wifi: brcmsmac: Use str_true_false() helper
[+] wifi: brcmfmac: fix EXTSAE WPA3 connection failure due to AUTH TX failure
[+] wifi: brcm80211: Remove yet more unused functions
[+] wifi: brcm80211: Remove more unused functions
[+] wifi: brcm80211: Remove unused functions
[+] wifi: iwlwifi: Revert "wifi: iwlwifi: remove support of several iwl_ppag_table_cmd versions"
[+] wifi: iwlwifi: check validity of the FW API range
[+] wifi: iwlwifi: don't export symbols that we shouldn't
[+] wifi: iwlwifi: mld: use spec link id and not FW link id
[+] wifi: iwlwifi: mld: decode EOF bit for AMPDUs
[+] wifi: iwlwifi: Remove support for rx OMI bandwidth reduction
[+] wifi: iwlwifi: stop supporting iwl_omi_send_status_notif ver 1
[+] wifi: iwlwifi: remove SC2F firmware support
[+] wifi: iwlwifi: mvm: Remove NAN support
[+] wifi: iwlwifi: mld: avoid outdated reorder buffer head_sn
[+] wifi: iwlwifi: mvm: avoid outdated reorder buffer head_sn
[+] wifi: iwlwifi: disable certain features for fips_enabled
[+] wifi: iwlwifi: mld: support channel survey collection for ACS scans
[+] wifi: iwlwifi: mld: disable RX aggregation if requested
[+] dt-bindings: net: wireless: rt2800: add SOC Wifi
[+] MIPS: dts: ralink: mt7620a: add wifi
[+] wifi: rt2x00: soc: modernize probe
[+] wifi: rt2800: move 2x00soc to 2800soc
[+] wifi: rt2800soc: allow loading from OF
[+] wifi: rt2x00: remove mod_name from platform_driver
[+] wifi: rt2x00: add COMPILE_TEST
[+] wifi: mac80211: fix WARN_ON for monitor mode on some devices
[+] wifi: brcmfmac: cyw: Fix __counted_by to be LE variant
[+] wifi: mac80211: fix unassigned variable access
[+] wifi: mac80211: don't require cipher and keylen in gtk rekey
[+] wifi: nl80211: Set num_sub_specs before looping through sub_specs
[+] wifi: mac80211: Write cnt before copying in ieee80211_copy_rnr_beacon()
[+] Merge tag 'ath-next-20250721' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath into wireless-next
[+] wifi: iwlwifi: mvm/fw: Avoid -Wflex-array-member-not-at-end warnings
[+] wifi: iwlwifi: Fix typo "ransport"
[+] wifi: iwlwifi: fix cmd length when sending WOWLAN_TSC_RSC_PARAM
[+] wifi: ath12k: Correct tid cleanup when tid setup fails
[+] wifi: ath12k: bring DFS support back for WCN7850
[+] wifi: ath12k: Prefer {} to {0} in initializers
[+] wifi: ath11k: Prefer {} to {0} in initializers
[+] wifi: ath10k: Prefer {} to {0} in initializers
[+] wifi: cfg80211/mac80211: report link ID for unexpected frames
[+] wifi: mac80211: determine missing link_id in ieee80211_rx_for_interface() based on frequency
[+] wifi: brcmfmac: support CYW54591 PCIE device
[+] wifi: brcmfmac: fix P2P discovery failure in P2P peer due to missing P2P IE
[+] wifi: cfg80211: reject HTC bit for management frames
[+] wifi: mac80211: remove ieee80211_remove_key
[+] wifi: ath12k: Advertise encapsulation/decapsulation offload support to mac80211
[+] wifi: ath12k: Fix TX status reporting to mac80211 when offload is enabled
[+] wifi: ath12k: Fix the handling of TX packets in Ethernet mode
[+] wifi: ath12k: Add support to parse max ext2 wmi service bit
[+] wifi: ath12k: fix endianness handling while accessing wmi service bit
[+] Reapply "wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()"
[+] wifi: mac80211: Check 802.11 encaps offloading in ieee80211_tx_h_select_key()
[+] wifi: mac80211: Don't call fq_flow_idx() for management frames
[+] wifi: mac80211: Do not schedule stopped TXQs
[+] wifi: cfg80211: Add missing lock in cfg80211_check_and_end_cac()
[+] wifi: plfxlc: Fix error handling in usb driver probe
[+] wifi: mac80211: support returning the S1G short beacon skb
[+] wifi: mac80211: support initialising current S1G short beacon index
[+] wifi: mac80211: support initialising an S1G short beaconing BSS
[+] wifi: cfg80211: support configuring an S1G short beaconing BSS
[+] wifi: brcmfmac: Add support for the SDIO 43751 device
[+] wifi: wilc1000: Use min() to improve code
[+] wifi: mwifiex: Use max_t() to improve code
[+] wifi: brcm80211: Use min() to improve code
[+] wifi: brcmfmac: Fix typo "notifer"
[+] wifi: mac80211: reject TDLS operations when station is not associated
[+] wifi: brcmsmac: Remove const from tbl_ptr parameter in wlc_lcnphy_common_read_table()
[+] wifi: mac80211: extend connection monitoring for MLO
[+] wifi: mac80211: extend beacon monitoring for MLO
[+] wifi: mac80211: Add link iteration macro for link data with rcu_dereference
[+] wifi: mac80211: fix macro scoping in for_each_link_data
[+] wifi: cfg80211/mac80211: remove wrong scan request n_channels
[+] Merge tag 'rtw-next-2025-07-18' of https://github.com/pkshih/rtw
[+] wifi: rtlwifi: Use min()/max() to improve code
[+] wifi: rtw89: wow: Add Basic Rate IE to probe request in scheduled scan mode
[+] wifi: rtw89: Lower the timeout in rtw89_fwdl_check_path_ready_ax() for USB
[+] wifi: rtw89: Lower the timeout in rtw89_fw_read_c2h_reg() for USB
[+] wifi: rtw89: check path range before using in rtw89_fw_h2c_rf_ps_info()
[+] wifi: rtw89: purge obsoleted scan events with software sequence number
[+] wifi: rtw89: dynamically update EHT preamble puncturing
[+] wifi: rtw89: mac: reduce PPDU status length for WiFi 6 chips
[+] wifi: rtw89: trigger TX stuck if FIFO full
[+] wifi: ath11k: fix sleeping-in-atomic in ath11k_mac_op_set_bitrate_mask()
[+] wifi: ath5k: Use max() to improve code
[+] wifi: ath12k: remove unneeded semicolon in ath12k_mac_parse_tx_pwr_env()
[+] wifi: ath12k: Validate peer_id before searching for peer
[+] wifi: ath12k: Use HTT_TCL_METADATA_VER_V1 in FTM mode
[+] wifi: rtw88: Fix macid assigned to TDLS station
[+] wifi: rtw88: enable TX reports for the management queue
[+] wifi: rtl8xxxu: Fix RX skb size for aggregation disabled
[+] wifi: rtw89: 8852b: implement RFK multi-channel handling and support chanctx up to 2
[+] wifi: rtw89: 8852b: configure FW version for SCAN_OFFLOAD_EXTRA_OP feature
[+] wifi: rtw89: 8852bt: implement RFK multi-channel handling and support chanctx up to 2
[+] wifi: rtw89: 8852bt: configure FW version for SCAN_OFFLOAD_EXTRA_OP feature
[+] wifi: rtw89: tweak tx wake notify matching condition
[+] wifi: rtw89: update SER L2 type default value
[+] wifi: rtw89: introduce fw feature group and redefine CRASH_TRIGGER
[+] wifi: rtw89: check LPS H2C command complete by C2H reg instead of done ack
[+] wifi: rtw89: mcc: solve GO's TBTT change and TBTT too close to NoA issue
[+] wifi: rtw89: extend HW scan of WiFi 7 chips for extra OP chan when concurrency
[+] wifi: rtw89: mcc: when MCC stop forcing to stay at GO role
[+] wifi: rtw89: mcc: enlarge GO NoA duration to cover channel switching time
[+] wifi: rtw89: add DIG suspend/resume flow when scan and connection
[+] wifi: rtw89: mcc: add H2C command to support different PD level in MCC
[+] wifi: rtw89: regd/acpi: support 6 GHz VLP policy via ACPI DSM
[+] wifi: rtw89: regd/acpi: support regulatory rules via ACPI DSM and parse rule of regd_UK
[+] wifi: rtw89: regd/acpi: update field definition to specific country in UNII-4 conf
[+] wifi: rtw89: regd/acpi: support country CA by BIT(1) in 6 GHz SP conf
[+] wifi: ath12k: Add support to enqueue management frame at MLD level
[+] wifi: ath12k: Enable memory profile selection for QCN9274
[+] wifi: ath12k: Refactor macros to use memory profile-based values
[+] wifi: ath12k: Remove redundant TID calculation for QCN9274
[+] wifi: ath12k: Add a table of parameters entries impacting memory consumption
[+] wifi: ath12k: support average ack rssi in station dump
[+] wifi: ath12k: allow beacon protection keys to be installed in hardware
[+] wifi: ath12k: set RX_FLAG_SKIP_MONITOR in WBM error path
[+] wifi: ath12k: pack HTT pdev rate stats structs
[+] wifi: ath12k: update unsupported bandwidth flags in reg rules
[+] wifi: ath12k: Add num_stations counter for each interface
[+] wifi: ath12k: properly set bit for pdev mask for firmware PPDU_STATS request
[+] wifi: ath12k: Block radio bring-up in FTM mode
[+] wifi: ath12k: advertise NL80211_FEATURE_TX_POWER_INSERTION support
[+] wifi: ath12k: add support for Tx Power insertion in RRM action frame
[+] wifi: ath12k: fetch tx_retry and tx_failed from htt_ppdu_stats_user_cmpltn_common_tlv
[+] wifi: ath12k: correctly update bw for ofdma packets
[+] wifi: ath12k: add EHT support for TX rate
[+] wifi: ath12k: add link support for multi-link in arsta
[+] wifi: ath12k: fill link station statistics for MLO
[+] wifi: rtw89: Enable the new rtw89_8852bu module
[+] wifi: rtw89: Add rtw8852bu.c
[+] wifi: rtw89: 8852b: Add rtw8852b_hfc_param_ini_usb
[+] wifi: rtw89: 8852b: Add rtw8852b_dle_mem_usb3
[+] wifi: rtw89: 8852b: Fix rtw8852b_pwr_{on,off}_func() for USB
[+] wifi: rtw89: 8852bx: Accept USB devices and load their MAC address
[+] wifi: rtw89: enter power save mode aggressively
[+] wifi: rtw89: Enable the new USB modules
[+] wifi: rtw89: Add rtw8851bu.c
[+] wifi: rtw89: Add usb.{c,h}
[+] wifi: rtw89: Add some definitions for USB
[+] wifi: rtw89: Fix rtw89_mac_power_switch() for USB
[+] wifi: rtw89: 8851b: Modify rtw8851b_pwr_{on,off}_func() for USB
[+] wifi: rtw89: Hide some errors when the device is unplugged
[+] wifi: rtw89: Add extra TX headroom for USB
[+] wifi: rtw89: Disable deep power saving for USB/SDIO
[+] wifi: rtw89: Add rtw8851b_hfc_param_ini_usb
[+] wifi: rtw89: Add rtw8851b_dle_mem_usb{2,3}
[+] wifi: rtw89: Make hfc_param_ini in rtw89_chip_info an array
[+] wifi: rtw89: Make dle_mem in rtw89_chip_info an array
[+] wifi: rtw89: 8851b: Accept USB devices and load their MAC address
[+] wifi: rtw89: 8851b: rfk: update IQK to 0x14
[+] wifi: rtw89: 8851b: rfk: update DPK to 0x11
[+] wifi: rtw89: 8851b: update NCTL 0xB
[+] wifi: rtw89: 8851b: adjust ADC setting for RF calibration
[+] wifi: rtw89: 8851b: set ADC bandwidth select according to calibration value
[+] wifi: rtw89: 8851b: rfk: extend DPK path_ok type to u8
[+] wifi: rtw88: coex: Use bitwise instead of arithmetic operator for flags
[+] wifi: ath12k: add extended NSS bandwidth support for 160 MHz
[+] wifi: ath12k: add support for 160 MHz bandwidth
[+] wifi: ath12k: clean up 80P80 support
[+] wifi: ath12k: add support for setting fixed HE rate/GI/LTF
[+] wifi: ath12k: generate rx and tx mcs maps for supported HE mcs
[+] wifi: ath12k: move HE MCS mapper to a separate function
[+] wifi: ath12k: push EHT MU-MIMO params to hardware
[+] wifi: ath12k: push HE MU-MIMO params to hardware
[+] wifi: ath10k: shutdown driver when hardware is unreliable
[+] wifi: ath12k: fix timeout while waiting for regulatory update during interface creation
[+] wifi: ath6kl: Fix spellings
[+] wifi: ath10k: Fix Spelling
[+] wifi: wil6210: wmi: Fix spellings reported by codespell
[+] wifi: ath12k: Add support to RTT stats
[+] wifi: ath12k: Add support to TDMA and MLO stats
[+] wifi: ath12k: Add support for transmit histogram stats
[+] wifi: ath12k: Clear auth flag only for actual association in security mode
[+] wifi: ath12k: fix dest ring-buffer corruption when ring is full
[+] wifi: ath12k: fix source ring-buffer corruption
[+] wifi: ath12k: use plain access for descriptor length
[+] wifi: ath12k: fix dest ring-buffer corruption
[+] wifi: ath11k: fix dest ring-buffer corruption when ring is full
[+] wifi: ath11k: fix source ring-buffer corruption
[+] wifi: ath11k: use plain accesses for monitor descriptor
[+] wifi: ath11k: use plain access for descriptor length
[+] wifi: ath11k: fix dest ring-buffer corruption
[+] wifi: ath12k: Send WMI_VDEV_SET_TPC_POWER_CMD for AP vdev
[+] wifi: ath12k: Add memset and update default rate value in wmi tx completion
[+] wifi: ath12k: Fix beacon reception for sta associated to Non-TX AP
[+] wifi: ath12k: Fix station association with MBSSID Non-TX BSS
[+] wifi: ath12k: use real noise floor instead of default value
[+] wifi: ath12k: handle WMI event for real noise floor calculation
[+] wifi: ath11k: Make read-only const array svc_id static const
[+] wifi: ath11k: fix suspend use-after-free after probe failure
[+] wifi: ath11k: clear initialized flag for deinit-ed srng lists
[+] wifi: ath11k: support usercase-specific firmware overrides
[+] dt-bindings: net: wireless: ath11k-pci: describe firmware-name property
[+] wifi: ath9k: ahb: replace id_table with of
[+] dt-bindings: net: wireless: ath9k: add WIFI bindings
[+] wifi: ath9k: ahb: reorder includes
[+] wifi: ath9k: ahb: reorder declarations