Single branch specified, using that and the previous one: remotes/brancher/net-next-2025-06-10--09-00 (net-next-6.16-10882-g14febba9a42f) remotes/brancher/net-next-2025-06-10--12-00 (net-next-6.16-10907-ga2cea80a413c) ==== BASE IDENTICAL ==== ==== COMMIT DIFF ==== diff --git a/tmp/tmp.84pWRv3dyy b/tmp/tmp.Q8iS6Epjm3 index 4ac6f4a8bfb3..0adad0e8fd27 100644 --- a/tmp/tmp.84pWRv3dyy +++ b/tmp/tmp.Q8iS6Epjm3 @@ -8,7 +8,32 @@ selftests: net: enable profiling tc_action dbg profile patch forwarding: set timeout to 3 hours +selftest: Add selftest for multicast address notifications +hns3: work around stack size warning +net: phy: micrel: add cable test support for KSZ9477-class PHYs +net: phy: micrel: Add RX error counter support for KSZ9477 switch-integrated PHYs +net: phy: micrel: add MDI/MDI-X control support for KSZ9477 switch-integrated PHYs +net: airoha: Add TCP LRO support +net: arp: use kfree_skb_reason() in arp_rcv() +arm64: dts: qcom: ipq5018: Add GE PHY to internal mdio bus +arm64: dts: qcom: ipq5018: Add MDIO buses +net: phy: qcom: at803x: Add Qualcomm IPQ5018 Internal PHY support +dt-bindings: net: qca,ar803x: Add IPQ5018 Internal GE PHY support +clk: qcom: gcc-ipq5018: fix GE PHY reset ppp: convert to percpu netstats +dt-bindings: net: pse-pd: ti,tps23881: Add interrupt description +net: pse-pd: tps23881: Add support for static port priority feature +dt-bindings: net: pse-pd: microchip,pd692x0: Add manager regulator supply +net: pse-pd: pd692x0: Add support for controller and manager power supplies +net: pse-pd: pd692x0: Add support for PSE PI priority feature +net: ethtool: Add PSE port priority support feature +net: pse-pd: Add support for budget evaluation strategies +net: pse-pd: Add helper to report hardware enable status of the PI +net: ethtool: Add support for new power domains index description +net: pse-pd: Add support for PSE power domains +net: pse-pd: tps23881: Add support for PSE events and interrupts +net: pse-pd: Add support for reporting events +net: pse-pd: Introduce attached_phydev to pse control net: phy: dp83tg720: switch to adaptive polling and remove random delays net: phy: dp83tg720: remove redundant 600ms post-reset delay net: phy: dp83tg720: implement soft reset with asymmetric delay