Using -Oline -j 72 W=1 C=1 redirect to /tmp/tmp.VAFgyD8s3W and /tmp/tmp.cHQ29keY4G
CC=ccache gcc
gcc (GCC) 15.1.1 20250521 (Red Hat 15.1.1-2)
Tree base:
14fc0ce7125e ("net: phy: marvell10g: Support SFP through phy_port")
Skip baseline build, not the first patch and no Kconfig updates
Building the tree before the patch
make[1]: Entering directory '/home/nipa/net-next/wt-1/build_allmodconfig_warn'
  GEN     Makefile
#
# configuration written to .config
#
make[1]: Leaving directory '/home/nipa/net-next/wt-1/build_allmodconfig_warn'
  SYNC    include/config/auto.conf
  GEN     Makefile
  GEN     Makefile
  DESCEND objtool
  INSTALL libsubcmd_headers
  CALL    ../scripts/checksyscalls.sh
  CC [M]  drivers/net/phy/qcom/at803x.o
  CHECK   ../drivers/net/phy/qcom/at803x.c
  CHK     kernel/kheaders_data.tar.xz
  MODPOST Module.symvers
Kernel: arch/x86/boot/bzImage is ready  (#4178)
  LD [M]  drivers/net/phy/qcom/at803x.ko
Building the tree with the patch
make[1]: Entering directory '/home/nipa/net-next/wt-1/build_allmodconfig_warn'
  GEN     Makefile
#
# configuration written to .config
#
make[1]: Leaving directory '/home/nipa/net-next/wt-1/build_allmodconfig_warn'
  SYNC    include/config/auto.conf
  GEN     Makefile
  GEN     Makefile
  DESCEND objtool
  INSTALL libsubcmd_headers
  CALL    ../scripts/checksyscalls.sh
  CHK     kernel/kheaders_data.tar.xz
  CC [M]  drivers/net/phy/qcom/at803x.o
  CHECK   ../drivers/net/phy/qcom/at803x.c
  MODPOST Module.symvers
Kernel: arch/x86/boot/bzImage is ready  (#4178)
  CC [M]  drivers/net/phy/qcom/at803x.mod.o
  LD [M]  drivers/net/phy/qcom/at803x.ko