Using -Oline -j 72 W=1 C=1 redirect to /tmp/tmp.Xnc6drNFjQ and /tmp/tmp.AgE76JoBvr
CC=ccache gcc
gcc (GCC) 15.1.1 20250521 (Red Hat 15.1.1-2)
Tree base:
f2863d3ca8d2 ("net: phy: marvell: Support SFP through phy_port interface")
Skip baseline build, not the first patch and no Kconfig updates
Building the tree before the patch
make[1]: Entering directory '/home/nipa/net-next/wt-0/build_allmodconfig_warn'
  GEN     Makefile
#
# configuration written to .config
#
make[1]: Leaving directory '/home/nipa/net-next/wt-0/build_allmodconfig_warn'
  SYNC    include/config/auto.conf
  GEN     Makefile
  GEN     Makefile
  DESCEND objtool
  INSTALL libsubcmd_headers
  CALL    ../scripts/checksyscalls.sh
  CC [M]  drivers/net/phy/phy_device.o
  CC [M]  drivers/net/phy/phy_port.o
  CHECK   ../drivers/net/phy/phy_device.c
  CHECK   ../drivers/net/phy/phy_port.c
  CC [M]  drivers/net/phy/dp83822.o
  CC [M]  drivers/net/phy/marvell10g.o
  CC [M]  drivers/net/phy/marvell.o
  CC [M]  drivers/net/phy/marvell-88x2222.o
  CHECK   ../drivers/net/phy/dp83822.c
  CHECK   ../drivers/net/phy/marvell10g.c
  CHECK   ../drivers/net/phy/marvell.c
  CHECK   ../drivers/net/phy/marvell-88x2222.c
  LD [M]  drivers/net/phy/libphy.o
  CHK     kernel/kheaders_data.tar.xz
  GEN     kernel/kheaders_data.tar.xz
  CC [M]  kernel/kheaders.o
  CHECK   ../kernel/kheaders.c
  MODPOST Module.symvers
Kernel: arch/x86/boot/bzImage is ready  (#4149)
  LD [M]  kernel/kheaders.ko
  LD [M]  drivers/net/phy/libphy.ko
  LD [M]  drivers/net/phy/dp83822.ko
  LD [M]  drivers/net/phy/marvell10g.ko
  LD [M]  drivers/net/phy/marvell.ko
  LD [M]  drivers/net/phy/marvell-88x2222.ko
Building the tree with the patch
make[1]: Entering directory '/home/nipa/net-next/wt-0/build_allmodconfig_warn'
  GEN     Makefile
#
# configuration written to .config
#
make[1]: Leaving directory '/home/nipa/net-next/wt-0/build_allmodconfig_warn'
  SYNC    include/config/auto.conf
  GEN     Makefile
  GEN     Makefile
  DESCEND objtool
  INSTALL libsubcmd_headers
  CALL    ../scripts/checksyscalls.sh
  CC [M]  drivers/net/phy/phy_port.o
  CHECK   ../drivers/net/phy/phy_port.c
  CC [M]  drivers/net/phy/marvell-88x2222.o
  CC [M]  drivers/net/phy/marvell10g.o
  CC [M]  drivers/net/phy/dp83822.o
  CHECK   ../drivers/net/phy/marvell-88x2222.c
  CHECK   ../drivers/net/phy/marvell10g.c
  CHECK   ../drivers/net/phy/dp83822.c
  CC [M]  drivers/net/phy/phy_device.o
  CC [M]  drivers/net/phy/marvell.o
  CHECK   ../drivers/net/phy/phy_device.c
  CHECK   ../drivers/net/phy/marvell.c
  LD [M]  drivers/net/phy/libphy.o
  CHK     kernel/kheaders_data.tar.xz
  GEN     kernel/kheaders_data.tar.xz
  CC [M]  kernel/kheaders.o
  CHECK   ../kernel/kheaders.c
  MODPOST Module.symvers
Kernel: arch/x86/boot/bzImage is ready  (#4149)
  LD [M]  kernel/kheaders.ko
  LD [M]  drivers/net/phy/dp83822.ko
  LD [M]  drivers/net/phy/marvell.ko
  LD [M]  drivers/net/phy/marvell-88x2222.ko
  CC [M]  drivers/net/phy/libphy.mod.o
  CC [M]  drivers/net/phy/marvell10g.mod.o
  LD [M]  drivers/net/phy/libphy.ko
  LD [M]  drivers/net/phy/marvell10g.ko