Using -Oline -j 72 W=1 redirect to /tmp/tmp.SlFd9con5w and /tmp/tmp.ksWW01Bc2H
CC=ccache gcc
gcc (GCC) 15.1.1 20250521 (Red Hat 15.1.1-2)
Tree base:
5466491c9e33 ("ionic: Prevent driver/fw getting out of sync on devcmd(s)")
Baseline building the tree
make[1]: Entering directory '/home/nipa/net/wt-0/build_32bit'
  GEN     Makefile
#
# configuration written to .config
#
make[1]: Leaving directory '/home/nipa/net/wt-0/build_32bit'
  SYNC    include/config/auto.conf
  GEN     Makefile
  GEN     Makefile
  CALL    ../scripts/checksyscalls.sh
  CC      net/ipv4/tcp_fastopen.o
  CC [M]  net/atm/addr.o
  CC [M]  net/atm/pvc.o
  CC [M]  net/atm/signaling.o
  CC [M]  net/atm/svc.o
  CC [M]  net/atm/ioctl.o
  CC [M]  net/atm/common.o
  AR      net/ipv4/built-in.a
  CC [M]  net/atm/atm_misc.o
  CC [M]  net/atm/raw.o
  CC [M]  drivers/usb/atm/cxacru.o
  CC [M]  drivers/usb/atm/speedtch.o
  CC [M]  drivers/usb/atm/ueagle-atm.o
  CC [M]  net/atm/resources.o
  CC [M]  drivers/usb/atm/usbatm.o
  CC [M]  drivers/usb/atm/xusbatm.o
  CC [M]  net/atm/atm_sysfs.o
  CC [M]  net/atm/proc.o
  CC [M]  net/atm/clip.o
  CC [M]  net/atm/br2684.o
  CC [M]  net/atm/lec.o
  CC [M]  net/atm/mpc.o
  CC [M]  net/atm/mpoa_caches.o
  CC [M]  net/atm/mpoa_proc.o
  CC [M]  net/atm/pppoatm.o
  LD [M]  net/atm/atm.o
  LD [M]  net/atm/mpoa.o
  AR      net/built-in.a
  CC [M]  drivers/atm/nicstar.o
  CC [M]  drivers/atm/iphase.o
  CC [M]  drivers/atm/suni.o
  CC [M]  drivers/atm/fore200e.o
  CC [M]  drivers/atm/eni.o
  CC [M]  drivers/atm/idt77252.o
  CC [M]  drivers/atm/solos-pci.o
  CC [M]  drivers/atm/idt77105.o
  CC [M]  drivers/atm/adummy.o
  CC [M]  drivers/atm/atmtcp.o
  CC [M]  drivers/atm/lanai.o
  LD [M]  drivers/atm/fore_200e.o
  CC [M]  drivers/atm/he.o
  CHK     kernel/kheaders_data.tar.xz
  GEN     kernel/kheaders_data.tar.xz
  CC [M]  kernel/kheaders.o
  AR      built-in.a
  AR      vmlinux.a
  LD      vmlinux.o
  OBJCOPY modules.builtin.modinfo
  GEN     modules.builtin
  MODPOST Module.symvers
  UPD     include/generated/utsversion.h
  CC      init/version-timestamp.o
  KSYMS   .tmp_vmlinux0.kallsyms.S
  AS      .tmp_vmlinux0.kallsyms.o
  LD      .tmp_vmlinux1
  LD [M]  kernel/kheaders.ko
  LD [M]  drivers/usb/atm/cxacru.ko
  LD [M]  drivers/usb/atm/speedtch.ko
  LD [M]  drivers/usb/atm/ueagle-atm.ko
  LD [M]  drivers/usb/atm/usbatm.ko
  LD [M]  drivers/usb/atm/xusbatm.ko
  LD [M]  drivers/atm/nicstar.ko
  LD [M]  drivers/atm/iphase.ko
  LD [M]  drivers/atm/suni.ko
  LD [M]  drivers/atm/fore_200e.ko
  LD [M]  drivers/atm/eni.ko
  LD [M]  drivers/atm/idt77252.ko
  LD [M]  drivers/atm/solos-pci.ko
  LD [M]  drivers/atm/idt77105.ko
  LD [M]  drivers/atm/adummy.ko
  LD [M]  drivers/atm/lanai.ko
  CC [M]  drivers/atm/atmtcp.mod.o
  LD [M]  drivers/atm/he.ko
  LD [M]  net/atm/clip.ko
  CC [M]  net/atm/atm.mod.o
  LD [M]  net/atm/br2684.ko
  LD [M]  net/atm/lec.ko
  LD [M]  net/atm/mpoa.ko
  LD [M]  net/atm/pppoatm.ko
  LD [M]  drivers/atm/atmtcp.ko
  LD [M]  net/atm/atm.ko
  NM      .tmp_vmlinux1.syms
  KSYMS   .tmp_vmlinux1.kallsyms.S
  AS      .tmp_vmlinux1.kallsyms.o
  LD      .tmp_vmlinux2
  NM      .tmp_vmlinux2.syms
  KSYMS   .tmp_vmlinux2.kallsyms.S
  AS      .tmp_vmlinux2.kallsyms.o
  LD      vmlinux.unstripped
  NM      System.map
  SORTTAB vmlinux.unstripped
  RSTRIP  vmlinux
  GEN     modules.builtin.ranges
  CC      arch/x86/boot/version.o
  OBJCOPY arch/x86/boot/compressed/vmlinux.bin
  RELOCS  arch/x86/boot/compressed/vmlinux.relocs
  VOFFSET arch/x86/boot/compressed/../voffset.h
  CC      arch/x86/boot/compressed/misc.o
  CC      arch/x86/boot/compressed/kaslr.o
  GZIP    arch/x86/boot/compressed/vmlinux.bin.gz
  MKPIGGY arch/x86/boot/compressed/piggy.S
  AS      arch/x86/boot/compressed/piggy.o
  LD      arch/x86/boot/compressed/vmlinux
  ZOFFSET arch/x86/boot/zoffset.h
  OBJCOPY arch/x86/boot/vmlinux.bin
  AS      arch/x86/boot/header.o
  LD      arch/x86/boot/setup.elf
  OBJCOPY arch/x86/boot/setup.bin
  BUILD   arch/x86/boot/bzImage
Kernel: arch/x86/boot/bzImage is ready  (#819)
Building the tree before the patch
make[1]: Entering directory '/home/nipa/net/wt-0/build_32bit'
  GEN     Makefile
#
# configuration written to .config
#
make[1]: Leaving directory '/home/nipa/net/wt-0/build_32bit'
  SYNC    include/config/auto.conf
  GEN     Makefile
  GEN     Makefile
  CALL    ../scripts/checksyscalls.sh
  CHK     kernel/kheaders_data.tar.xz
Kernel: arch/x86/boot/bzImage is ready  (#819)
Building the tree with the patch
make[1]: Entering directory '/home/nipa/net/wt-0/build_32bit'
  GEN     Makefile
#
# configuration written to .config
#
make[1]: Leaving directory '/home/nipa/net/wt-0/build_32bit'
  SYNC    include/config/auto.conf
  GEN     Makefile
  GEN     Makefile
  CALL    ../scripts/checksyscalls.sh
  CHK     kernel/kheaders_data.tar.xz
Kernel: arch/x86/boot/bzImage is ready  (#819)