Using -Oline -j 72 W=1 redirect to /tmp/tmp.HEiyYVg79g and /tmp/tmp.0eVbUm6cTy
CC=ccache gcc
gcc (GCC) 15.0.1 20250329 (Red Hat 15.0.1-0)
Tree base:
e8716b5b0dff ("net: ethernet: mtk_eth_soc: do not reset PSE when setting FE")
Baseline building the tree
make[1]: Entering directory '/home/nipa/net/wt-0/build_32bit'
  GEN     Makefile
#
# configuration written to .config
#
make[1]: Leaving directory '/home/nipa/net/wt-0/build_32bit'
  SYNC    include/config/auto.conf
  GEN     Makefile
  GEN     Makefile
  CALL    ../scripts/checksyscalls.sh
  CC [M]  net/can/gw.o
  LD [M]  net/can/can-gw.o
  CHK     kernel/kheaders_data.tar.xz
  CC [M]  drivers/net/ethernet/mediatek/mtk_eth_soc.o
  LD [M]  drivers/net/ethernet/mediatek/mtk_eth.o
  CC [M]  drivers/net/can/rockchip/rockchip_canfd-core.o
  CC [M]  drivers/net/can/spi/mcp251xfd/mcp251xfd-core.o
  LD [M]  drivers/net/can/rockchip/rockchip_canfd.o
  LD [M]  drivers/net/can/spi/mcp251xfd/mcp251xfd.o
  CC [M]  drivers/net/can/m_can/m_can.o
  MODPOST Module.symvers
Kernel: arch/x86/boot/bzImage is ready  (#568)
  CC [M]  drivers/net/ethernet/mediatek/mtk_eth.mod.o
  LD [M]  drivers/net/can/rockchip/rockchip_canfd.ko
  LD [M]  drivers/net/can/spi/mcp251xfd/mcp251xfd.ko
  CC [M]  drivers/net/can/m_can/m_can.mod.o
  LD [M]  net/can/can-gw.ko
  LD [M]  drivers/net/ethernet/mediatek/mtk_eth.ko
  LD [M]  drivers/net/can/m_can/m_can.ko
Building the tree before the patch
make[1]: Entering directory '/home/nipa/net/wt-0/build_32bit'
  GEN     Makefile
#
# configuration written to .config
#
make[1]: Leaving directory '/home/nipa/net/wt-0/build_32bit'
  SYNC    include/config/auto.conf
  GEN     Makefile
  GEN     Makefile
  CALL    ../scripts/checksyscalls.sh
  CHK     kernel/kheaders_data.tar.xz
  CC [M]  drivers/net/can/m_can/m_can.o
  MODPOST Module.symvers
Kernel: arch/x86/boot/bzImage is ready  (#568)
  CC [M]  drivers/net/can/m_can/m_can.mod.o
  LD [M]  drivers/net/can/m_can/m_can.ko
Building the tree with the patch
make[1]: Entering directory '/home/nipa/net/wt-0/build_32bit'
  GEN     Makefile
#
# configuration written to .config
#
make[1]: Leaving directory '/home/nipa/net/wt-0/build_32bit'
  SYNC    include/config/auto.conf
  GEN     Makefile
  GEN     Makefile
  CALL    ../scripts/checksyscalls.sh
  CHK     kernel/kheaders_data.tar.xz
  CC [M]  drivers/net/can/m_can/m_can.o
  MODPOST Module.symvers
Kernel: arch/x86/boot/bzImage is ready  (#568)
  CC [M]  drivers/net/can/m_can/m_can.mod.o
  LD [M]  drivers/net/can/m_can/m_can.ko