Using -Oline -j 72 W=1 C=1 redirect to /tmp/tmp.KySdUpYpBw and /tmp/tmp.d97ON9k20i
CC=ccache gcc
gcc (GCC) 15.2.1 20250808 (Red Hat 15.2.1-1)
Tree base:
3d3aa9472c6d ("bnxt_en: correct offset handling for IPv6 destination address")
Baseline building the tree
make[1]: Entering directory '/home/nipa/net/wt-0/build_allmodconfig_warn'
  GEN     Makefile
#
# configuration written to .config
#
make[1]: Leaving directory '/home/nipa/net/wt-0/build_allmodconfig_warn'
  SYNC    include/config/auto.conf
  GEN     Makefile
  GEN     Makefile
  DESCEND objtool
  INSTALL libsubcmd_headers
  CALL    ../scripts/checksyscalls.sh
  CC [M]  drivers/net/can/sun4i_can.o
  CC [M]  drivers/net/can/rcar/rcar_canfd.o
  CC [M]  drivers/net/can/spi/hi311x.o
  CC [M]  drivers/net/can/usb/mcba_usb.o
  CC [M]  drivers/net/can/usb/etas_es58x/es58x_core.o
  CC [M]  drivers/net/can/usb/peak_usb/pcan_usb_core.o
  CHECK   ../drivers/net/can/sun4i_can.c
  CHECK   ../drivers/net/can/rcar/rcar_canfd.c
  CHECK   ../drivers/net/can/usb/mcba_usb.c
  CHECK   ../drivers/net/can/spi/hi311x.c
  CHECK   ../drivers/net/can/usb/peak_usb/pcan_usb_core.c
  CHECK   ../drivers/net/can/usb/etas_es58x/es58x_core.c
  LD [M]  drivers/net/can/usb/peak_usb/peak_usb.o
  LD [M]  drivers/net/can/usb/etas_es58x/etas_es58x.o
  CC [M]  drivers/net/ethernet/mellanox/mlx5/core/pci_irq.o
  CHECK   ../drivers/net/ethernet/mellanox/mlx5/core/pci_irq.c
  LD [M]  drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.o
  MODPOST Module.symvers
Kernel: arch/x86/boot/bzImage is ready  (#1537)
  CC [M]  drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.mod.o
  LD [M]  drivers/net/can/rcar/rcar_canfd.ko
  LD [M]  drivers/net/can/usb/etas_es58x/etas_es58x.ko
  LD [M]  drivers/net/can/usb/mcba_usb.ko
  CC [M]  drivers/net/can/spi/hi311x.mod.o
  LD [M]  drivers/net/can/usb/peak_usb/peak_usb.ko
  LD [M]  drivers/net/can/sun4i_can.ko
  LD [M]  drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko
  LD [M]  drivers/net/can/spi/hi311x.ko
Building the tree before the patch
make[1]: Entering directory '/home/nipa/net/wt-0/build_allmodconfig_warn'
  GEN     Makefile
#
# configuration written to .config
#
make[1]: Leaving directory '/home/nipa/net/wt-0/build_allmodconfig_warn'
  SYNC    include/config/auto.conf
  GEN     Makefile
  GEN     Makefile
  DESCEND objtool
  INSTALL libsubcmd_headers
  CALL    ../scripts/checksyscalls.sh
  CC [M]  drivers/net/can/spi/hi311x.o
  CHECK   ../drivers/net/can/spi/hi311x.c
  MODPOST Module.symvers
Kernel: arch/x86/boot/bzImage is ready  (#1537)
  CC [M]  drivers/net/can/spi/hi311x.mod.o
  LD [M]  drivers/net/can/spi/hi311x.ko
Building the tree with the patch
make[1]: Entering directory '/home/nipa/net/wt-0/build_allmodconfig_warn'
  GEN     Makefile
#
# configuration written to .config
#
make[1]: Leaving directory '/home/nipa/net/wt-0/build_allmodconfig_warn'
  SYNC    include/config/auto.conf
  GEN     Makefile
  GEN     Makefile
  DESCEND objtool
  INSTALL libsubcmd_headers
  CALL    ../scripts/checksyscalls.sh
  CC [M]  drivers/net/can/spi/hi311x.o
  CHECK   ../drivers/net/can/spi/hi311x.c
  MODPOST Module.symvers
Kernel: arch/x86/boot/bzImage is ready  (#1537)
  CC [M]  drivers/net/can/spi/hi311x.mod.o
  LD [M]  drivers/net/can/spi/hi311x.ko